luci-app-easymesh/root/easymesh/easymesh.sh

#!/bin/bash

# Dumb AP Mode Block
set_apmode() {
    touch /root/.madeap
    # AP_MODE=$(uci -q get easymesh.config.ap_mode)
    # if [ "$AP_MODE" = 1 ]; then
        # Set a flag to indicate that we are in AP mode
        # When we go to disable easymesh, we will check this flag and if it was set we restore settings
        uci set easymesh.config.ap_mode_enabled=1

        # Backup our configs
        rm /etc/config/*.meshbak
        cp /etc/config/wireless /etc/config/wireless.meshbak
        cp /etc/config/network /etc/config/network.meshbak
        cp /etc/config/dhcp /etc/config/dhcp.meshbak

        # Disabling and stopping services not needed
        for service in firewall dnsmasq odhcpd; do
            if /etc/init.d/$service enabled; then
                echo "Disabling and stopping $service..."
                /etc/init.d/$service disable
                /etc/init.d/$service stop
            else
                echo "$service is not enabled, skipping..."
            fi
        done

        # Set LAN interface to DHCP client
        uci del network.lan.ipaddr
        uci del network.lan.netmask
        uci set network.lan.proto='dhcp'
        uci del network.wan
        uci del network.wan6

        # Fix firewall to be disabled
        uci del firewall.lan.network
        uci del firewall.wan.network

        # Fix dhcp to be disabled
        uci set dhcp.lan.ignore='1'
        uci del dhcp.wan

        # Fix this for proper variable name
        HOSTNAME=$(uci -q get easymesh.config.hostname)
        # Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
        uci set system.@system[0].hostname=$HOSTNAME

        # Retrieve the list of ports for network.@device[0]
        LAN_PORTS=$(uci get network.@device[0].ports)

        # Check if 'wan' is already in the list of ports
        if echo "$LAN_PORTS" | grep -q -w 'wan'; then
            echo "'wan' is already in the list of ports for lan."
        else
            echo "'wan' is not in the list. Adding it to lan ports..."
            uci add_list network.@device[0].ports='wan'
        fi

        # Get the radio to be used for mesh from the config
        AP_RADIO=$(uci -q get easymesh.config.apRadio)

        # # Loop through the selected radios
        # for CURRENT_RADIO in $AP_RADIO; do
        #     echo "Multiple Radio Setup, Current Radio: $CURRENT_RADIO"
        #     # Extact the radio number from the radio name
        #     wifi_num="${cur_radio#CURRENT_RADIO}"
        #     uci set wireless.wifinet${wifi_num}.network="lan private_router_batman"
        # done

        uci commit
        # Tell openwrt to reload the configs
        reload_config
        /etc/init.d/network reload
    # else
    #     # Set a flag to indicate that we are in AP mode
    #     uci set easymesh.config.ap_mode_enabled=0

    #     # Restore our configs
    #     [ -f /etc/config/wireless.meshbak ] && {
    #         mv /etc/config/wireless /etc/config/wireless.dumbap
    #         cp /etc/config/wireless.meshbak /etc/config/wireless
    #     }
    #     [ -f /etc/config/network.meshbak ] && {
    #         mv /etc/config/network /etc/config/network.dumbap
    #         cp /etc/config/network.meshbak /etc/config/network
    #     }
    #     [ -f /etc/config/dhcp.meshbak ] && {
    #         mv /etc/config/dhcp /etc/config/dhcp.dumbap
    #         cp /etc/config/dhcp.meshbak /etc/config/dhcp
    #     }

    #     # Enable and start services not needed
    #     for service in firewall dnsmasq odhcpd; do
    #         if /etc/init.d/$service disabled; then
    #             echo "Enabling and starting $service..."
    #             /etc/init.d/$service enable
    #             /etc/init.d/$service start
    #         else
    #             echo "$service is not disabled, skipping..."
    #         fi
    #     done

    #     reload_config
    #     /etc/init.d/network reload
    # fi
}

clear_mesh_radio() {
    # Get the radio to be used for mesh from the config
    AP_RADIO=$(uci -q get easymesh.config.apRadio)
    # Get the mesh name from the UCI configuration
    OLD_MESH_NAME=$(uci -q get easymesh.config.old_mesh_id)

    # Check if MESH_NAME is not empty
    if [ -z "$OLD_MESH_NAME" ]; then
        echo "Old mesh name is not set. None to clear."
        return;
    fi

    # Get the output from uci show wireless
    uci_output=$(uci show wireless)

    # Find the mesh network with the matching mesh_id and delete it
    mesh_id=$(echo "$uci_output" | grep -o "wireless\.mesh_radio[0-9]*\.mesh_id='$OLD_MESH_NAME'")
    if [ ! -z "$mesh_id" ]; then
        # Extract the number from the interface name
        mesh_radio=$(echo "$mesh_id" | grep -o "radio[0-9]*")
        # Loop through radios and delete the mesh networks
        for radio in $AP_RADIO; do
            # Delete the network
            uci del wireless.mesh_$radio
            echo "Deleted mesh network with mesh_id '$OLD_MESH_NAME' on $radio"
        done
    fi

    # Find the wireless network with the matching ssid and delete it
    ssid=$(echo "$uci_output" | grep -o "wireless\.wifinet[0-9]*\.ssid='$OLD_MESH_NAME'")
    if [ ! -z "$ssid" ]; then
        # Loop through  radios and delete the wireless networks
        for radio in $AP_RADIO; do
            # Get the number from the radio name
            radio_num="${radio#radio}"
            # Delete the network
            uci del wireless.wifinet$radio_num
            echo "Deleted wireless network with ssid '$OLD_MESH_NAME' on radio$radio_num"
        done
    fi

    # Commit changes to make sure the wireless configuration is updated
    uci commit wireless
    # Restart wireless to apply changes
    wifi up
    echo "Wireless interfaces reloaded."
}

create_batman_network() {
    # Check if bat0 already exists
    if uci -q get network.bat0 >/dev/null; then
        echo "bat0 interface already exists."
    else
        uci set network.bat0=interface
        uci set network.bat0.proto='batadv'
        uci set network.bat0.routing_algo='BATMAN_IV'
        uci set network.bat0.aggregated_ogms='1'
        uci set network.bat0.ap_isolation='0'
        uci set network.bat0.bonding='1'
        uci set network.bat0.bridge_loop_avoidance='1'
        uci set network.bat0.distributed_arp_table='1'
        uci set network.bat0.fragmentation='1'
        uci set network.bat0.hop_penalty='30'
        uci set network.bat0.isolation_mark='0x00000000/0x00000000'
        uci set network.bat0.log_level='0'
        uci set network.bat0.multicast_fanout='16'
        uci set network.bat0.multicast_mode='1'
        uci set network.bat0.network_coding='0'
        uci set network.bat0.orig_interval='1000'
        echo "bat0 interface has been created."

        # Set the bat0 role
        BAT_ROLE=$(uci -q get easymesh.config.role)
        if [ "${BAT_ROLE}" == "server" ]; then
            uci set network.bat0.gw_mode='server'
        elif [ "${BAT_ROLE}" == "client" ]; then
            uci set network.bat0.gw_mode='client'
        else
            uci set network.bat0.gw_mode='off'
        fi

        # Get the current list of ports for the 'br-lan' interface
        LAN_PORTS=$(uci -q get network.@device[0].ports)
        # Check if 'bat0' is already in the list of ports for 'br-lan'
        if echo "$LAN_PORTS" | grep -q 'bat0'; then
            uci del_list network.@device[0].ports='bat0'
            echo "Old bat0 interface deleted from lan network."
        fi

        uci commit network
    fi

    # Check if network.private_router_batman already exists
    if uci -q get network.private_router_batman >/dev/null; then
        echo "network.private_router_batman interface already exists."
    else
        # Get the LAN bridge name
        LAN_NAME=$(uci -q get network.@device[0].name)

        # Setup our Private Router Batman Interface
        uci set network.private_router_batman=interface
        uci set network.private_router_batman.proto='batadv_hardif'
        uci set network.private_router_batman.master='bat0'
        uci set network.private_router_batman.device="$LAN_NAME"
        uci set network.private_router_batman.mtu='1536'

        uci commit network
    fi
}

process_radios() {
    # Get the radio to be used for mesh from the config
    AP_RADIO=$(uci -q get easymesh.config.apRadio)

    # Check if AP_RADIO is empty, if so exit
    if [ -z "$AP_RADIO" ]; then
        echo "No radio specified in the config, exiting."
        exit 1
    fi

    # Loop through the selected radios
    for CURRENT_RADIO in $AP_RADIO; do
        echo "Setting up mesh networks for: $CURRENT_RADIO"
        setup_mesh_radio $CURRENT_RADIO
    done     
}

# This is called from the process_radios function and is passed the radio to be used for mesh
setup_mesh_radio() {
    CURRENT_RADIO=$1
    echo "Setting up radio: $CURRENT_RADIO"

    # Get the mesh name from UCI config
    MESH_NAME=$(uci -q get easymesh.config.mesh_id)

    # Commit changes to wireless
    uci commit wireless

    uci set wireless.mesh_$CURRENT_RADIO='wifi-iface'
    uci set wireless.mesh_$CURRENT_RADIO.device="$CURRENT_RADIO"
    uci set wireless.mesh_$CURRENT_RADIO.ifname="mesh_$CURRENT_RADIO"
    uci set wireless.mesh_$CURRENT_RADIO.network='private_router_batman'
    uci set wireless.mesh_$CURRENT_RADIO.mode='mesh'
    uci set wireless.mesh_$CURRENT_RADIO.mesh_id="$MESH_NAME"
    uci set wireless.mesh_$CURRENT_RADIO.mesh_fwding='0'
    uci set wireless.mesh_$CURRENT_RADIO.mesh_rssi_threshold='0'
    uci set wireless.mesh_$CURRENT_RADIO.mesh_ttl='1'
    uci set wireless.mesh_$CURRENT_RADIO.mcast_rate='24000'
    uci set wireless.mesh_$CURRENT_RADIO.disabled='0'

    uci commit wireless

    # Extact the radio number from the radio name
    RADIO_NUM="${CURRENT_RADIO#radio}"

    # Get the mobility domain from the config
    MOBILITY_DOMAIN=$(uci -q get easymesh.config.mobility_domain)

    # If mobility domain is empty, set it to a random 4 digit hex number, then set it in the config
    if [ -z "$MOBILITY_DOMAIN" ]; then
        MOBILITY_DOMAIN=$(hexdump -n 2 -e '2/1 "%02x"' /dev/urandom)
        uci set easymesh.config.mobility_domain=$MOBILITY_DOMAIN
        uci commit easymesh
    fi

    # Get the encryption enabled from the config
    ENCRYPTION_ENABLED=$(uci -q get easymesh.config.encryption)

    # Setup the interface for the mesh network
    uci set wireless.mesh_$CURRENT_RADIO.disabled='0'
    uci set wireless.wifinet$RADIO_NUM=wifi-iface
    uci set wireless.wifinet$RADIO_NUM.device=$CURRENT_RADIO
    uci set wireless.wifinet$RADIO_NUM.mode='ap'
    uci set wireless.wifinet$RADIO_NUM.ssid=$MESH_NAME
    uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
    uci set wireless.wifinet$RADIO_NUM.mobility_domain=$MOBILITY_DOMAIN
    uci set wireless.wifinet$RADIO_NUM.ft_over_ds='0'
    uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='0'
    uci set wireless.wifinet$RADIO_NUM.network='lan'
    uci set wireless.wifinet$RADIO_NUM.disabled=0

    # Get the encryption key from the config
    NETWORK_KEY=$(uci -q get easymesh.config.key)

    # Check if encryption is enabled and if the key is not empty
    if [ "$ENCRYPTION_ENABLED" = 1 ] && [ ! -z $NETWORK_KEY ]; then
        uci set wireless.mesh_$CURRENT_RADIO.encryption='sae'
        uci set wireless.mesh_$CURRENT_RADIO.key=$NETWORK_KEY
        uci set wireless.wifinet$RADIO_NUM.encryption='sae-mixed'
        uci set wireless.wifinet$RADIO_NUM.key=$NETWORK_KEY
    else
        uci set wireless.mesh_$CURRENT_RADIO.encryption='none'
        uci set wireless.wifinet$RADIO_NUM.encryption='none' 
        [ -z $NETWORK_KEY ] && echo "Encryption key is empty, so encryption was disabled."
    fi

    # Commit our block of changes to wireless
    uci commit wireless

    # Check if we need to setup kvr
    ENABLE_KVR=$(uci -q get easymesh.config.kvr)

    if [ "$ENABLE_KVR" = 1 ]; then
        uci set wireless.wifinet$RADIO_NUM.ieee80211k='1'
        uci set wireless.wifinet$RADIO_NUM.rrm_neighbor_report='1'
        uci set wireless.wifinet$RADIO_NUM.rrm_beacon_report='1'
        uci set wireless.wifinet$RADIO_NUM.ieee80211v='1'
        uci set wireless.wifinet$RADIO_NUM.bss_transition='1'
        uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
        uci set wireless.wifinet$RADIO_NUM.ft_over_ds='1'
        uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='1'
        uci commit wireless
    else
        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211k
        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211v
        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211r
        uci commit wireless
    fi

    # If KVR is enabled, setup DAWN
    if [ "$ENABLE_KVR" = 1 ]; then
        RSSI=$(uci -q get easymesh.config.rssi_val)
        LOW_RSSI=$(uci -q get easymesh.config.low_rssi_val)  
        uci set dawn.@metric[0].rssi_val=$RSSI
        uci set dawn.@metric[0].low_rssi_val=$LOW_RSSI
        uci commit dawn
        /etc/init.d/dawn enable && /etc/init.d/dawn start
    else
        /etc/init.d/dawn stop && /etc/init.d/dawn disable
    fi

    # Commit our block of changes to the configs
    uci commit
}

restart_and_reload() {
    # Get the radio to be used for mesh from the config
    AP_RADIO=$(uci -q get easymesh.config.apRadio)

    # Check if AP_RADIO is empty, if so exit
    if [ -z "$AP_RADIO" ]; then
        echo "No radio specified in the config, exiting."
        exit 1
    fi

    # Enable radios
    for radio in $AP_RADIO; do
        echo "Enabling $radio..."
        uci set wireless.$radio.disabled=0
    done

    uci commit wireless

    # Reload wifi to apply changes without restarting all interfaces
    wifi up
    echo "Wireless interfaces reloaded."

    # Apply network configuration changes
    reload_config
    echo "Network configuration reloaded."

    /etc/init.d/network reload
}

disable_batman_interfaces() {
    # Delete the bat0 interface
    if [ "$(uci -q get network.bat0)" = "interface" ]; then
        uci del network.bat0
    fi

    # Delete the private_router_batman network interface
    if [ "$(uci -q get network.private_router_batman)" = "interface" ]; then
        uci del network.private_router_batman
    fi

    uci commit network

    reload_config
    /etc/init.d/network reload
    echo "Network configuration reloaded."
}

# Enable easymesh
enable_easymesh() {
    # Clear old radios then set "old values"
    clear_mesh_radio
    uci set easymesh.config.old_mesh_id="$(uci -q get easymesh.config.mesh_id)"
    create_batman_network
    process_radios
    restart_and_reload
    # Set at end to be sure it worked
    uci set easymesh.config.running=1
}

# Disable easymesh
disable_easymesh() {
    # Clear old radios then clear "old values"
    clear_mesh_radio
    uci del easymesh.config.old_mesh_id
    disable_batman_interfaces
    # Set at end to be sure it worked
    uci del easymesh.config.running
}

sleep 5
if [ "$1" = "enable" ]; then
    enable_easymesh
    exit 0
elif [ "$1" = "disable" ]; then
    disable_easymesh
    exit 0
elif [ "$1" = "dumbap" ]; then
    set_apmode
    exit 0
else
    echo "Invalid argument. Please use 'start', 'stop' or 'dumbap'"
    exit 1
fi