diff --git a/luasrc/model/cbi/easymesh.lua b/luasrc/model/cbi/easymesh.lua
index 6fcf642..3dc4f06 100755
--- a/luasrc/model/cbi/easymesh.lua
+++ b/luasrc/model/cbi/easymesh.lua
@@ -224,12 +224,12 @@ ctrl.addremove = false
 
 btnStart = ctrl:option(Button, "_btn_start", translate("Enable Easy Mesh"))
 function btnStart.write()
-    io.popen("/easymesh/easymesh.sh")
+    io.popen("/easymesh/easymesh.sh start")
 end
 
 btnStop = ctrl:option(Button, "_btn_stop", translate("Disable Easy Mesh"))
 function btnStop.write()
-    io.popen("/easymesh/easymesh.sh")
+    io.popen("/easymesh/easymesh.sh stop")
 end
 
 function o.write(self, section, value)
diff --git a/root/easymesh/easymesh.sh b/root/easymesh/easymesh.sh
index 8a97d1b..ece9d54 100644
--- a/root/easymesh/easymesh.sh
+++ b/root/easymesh/easymesh.sh
@@ -1,383 +1,452 @@
 #!/bin/bash
 
-load_easymesh_config() {
-    enable=$(uci -q get easymesh.config.enabled)
-    mesh_bat0=$(uci -q get network.bat0)
-    ap_mode=$(uci -q get easymesh.config.ap_mode)
-    lan=$(uci -q get network.lan.ifname)
-    ipaddr=$(uci -q get easymesh.config.ipaddr)
-    netmask=$(uci -q get easymesh.config.netmask)
-    gateway=$(uci -q get easymesh.config.gateway)
-    dns=$(uci -q get easymesh.config.dns)
-    ap_ipaddr=$(uci -q get network.lan.ipaddr)
-    #ap_ipaddr1=$(sed -n '1p' /etc/easymesh 2>/dev/null)
-    apRadio=$(uci -q get easymesh.config.apRadio)
-    kvr=$(uci -q get easymesh.config.kvr)
-    iapp=$(uci -q get easymesh.config.iapp)
-    brlan=$(uci -q get network.@device[0].name)
-    role=$(uci -q get easymesh.config.role)
-    backbone=$(uci get easymesh.@easymesh[0].backbone)
-    apname=$(uci get easymesh.@easymesh[0].apname)
-    appass=$(uci get easymesh.@easymesh[0].appass)
-    # On a single line, print all of the variables to a file
-    printf "enable: $enable\nmesh_bat0: $mesh_bat0\nap_mode: $ap_mode\nlan: $lan\nipaddr: $ipaddr\nnetmask: $netmask\ngateway: $gateway\ndns: $dns\nap_ipaddr: $ap_ipaddr\nap_ipaddr1: $ap_ipaddr1\napRadio: $apRadio\nkvr: $kvr\niapp: $iapp\nbrlan: $brlan\nrole: $role\nbackbone: $backbone\napname: $apname\nappass: $appass" > /root/.easymesh
-}
+clear_old_networks() {
+    # Get the mesh name from UCI config
+    MESH_NAME=$(uci -q get easymesh.config.mesh_id)
+
+    # Get all the radios and go through them one by one to remove old networks and interfaces with the same mesh name
+    for CURRENT_RADIO in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
+        echo "Clearing old networks for radio: $CURRENT_RADIO"
+
+        # Use awk to parse the 'uci show wireless' output and find the matching section
+        matched_section=$(uci show wireless | awk -F. -v radio="$CURRENT_RADIO" -v ssid="$MESH_NAME" '
+        $0 ~ /^wireless\.wifinet[0-9]+\.device=/ && $3 ~ radio { device_section=$2 }
+        $0 ~ /^wireless\.wifinet[0-9]+\.ssid=/ && $3 ~ ssid && device_section == $2 { print $2; exit }
+        ')
+
+        # Check if a matching section was found
+        if [ -n "$matched_section" ]; then
+            echo "The matching wireless interface section is: $matched_section - deleting it"
+            uci delete wireless.$matched_section
+        fi
 
-stop_node() {
-    cp /etc/config/wireless.meshbak /etc/config/wireless
-    cp /etc/config/network.meshbak /etc/config/network
-    cp /etc/config/dhcp.meshbak /etc/config/dhcp
+        # Find and delete existing mesh network interfaces with the specified MESH_NAME on the current radio
+        EXISTING_MESH=$(uci show wireless | grep -w "mesh_id='$MESH_NAME'" | grep ".$CURRENT_RADIO." | cut -d'.' -f1-2)
+        for section in $EXISTING_MESH; do
+            uci delete $section
+            echo "The matching wireless interface section is: $section - deleting it"
+        done
 
-    /etc/init.d/network restart
-    /etc/init.d/system reload
+        # Commit changes to wireless
+        uci commit
+    done
 }
 
-# ap_mode_stop() {
-#     ap_ipaddr=$(uci -q get network.lan.ipaddr)
-#     ap_ipaddr1=$(sed -n '1p' /etc/easymesh 2>/dev/null)
-#     dns1=$(sed -n '2p' /etc/easymesh 2>/dev/null)
-#     if [ "$ap_ipaddr" = "$ap_ipaddr1" ]; then
-#         uci -q delete network.lan.gateway
-#         uci -q del_list network.lan.dns=$dns1
-#         uci commit network
-
-#         echo "" >/etc/easymesh
-
-#         uci -q delete dhcp.lan.dynamicdhcp
-#         uci -q delete dhcp.lan.ignore
-#         uci commit dhcp
-
-#         /etc/init.d/odhcpd enable && /etc/init.d/odhcpd start
-#         /etc/init.d/firewall enable && /etc/init.d/firewall start >/dev/null 2>&1
-#     fi
-# }
-
-add_wifi_mesh() {
-    mesh_nwi_mesh=$(uci -q get network.nwi_mesh_${apall})
-    mesh_apRadio=$(uci -q get wireless.mesh_${apall}.device)
-    mesh_mesh=$(uci -q get wireless.mesh_${apall})
-    mesh_id=$(uci -q get easymesh.config.mesh_id)
-    mobility_domain=$(uci -q get easymesh.config.mobility_domain)
-    key=$(uci -q get easymesh.config.key)
-    encryption=$(uci -q get easymesh.config.encryption)
-    # Print out all the variables
-    printf "mesh_nwi_mesh: $mesh_nwi_mesh\nmesh_apRadio: $mesh_apRadio\nmesh_mesh: $mesh_mesh\nmesh_id: $mesh_id\nmobility_domain: $mobility_domain\nkey: $key\nencryption: $encryption" > /root/.newmesh
-
-
-    if [ "$mesh_nwi_mesh" != "interface" ]; then
-        uci set network.nwi_mesh_$apall=interface
-        uci set network.nwi_mesh_$apall.proto='batadv_hardif'
-        uci set network.nwi_mesh_$apall.master='bat0'
-        uci set network.nwi_mesh_$apall.mtu='1536'
-        # adding batman to the 'lan' zone in fw
-        uci del_list firewall.lan.network="bat0"
-        uci add_list firewall.lan.network='bat0'
-        uci del_list firewall.lan.network="nwi_mesh_$apall"
-        uci add_list firewall.lan.network="nwi_mesh_$apall"
+create_bat0() {
+    # Check if bat0 already exists
+    if uci -q get network.bat0 >/dev/null; then
+        echo "bat0 interface already exists."
+    else
+        uci set network.bat0=interface
+        uci set network.bat0.proto='batadv'
+        uci set network.bat0.routing_algo='BATMAN_IV'
+        uci set network.bat0.aggregated_ogms='1'
+        uci set network.bat0.ap_isolation='0'
+        uci set network.bat0.bonding='1'
+        uci set network.bat0.bridge_loop_avoidance='1'
+        uci set network.bat0.distributed_arp_table='1'
+        uci set network.bat0.fragmentation='1'
+        uci set network.bat0.hop_penalty='30'
+        uci set network.bat0.isolation_mark='0x00000000/0x00000000'
+        uci set network.bat0.log_level='0'
+        uci set network.bat0.multicast_fanout='16'
+        uci set network.bat0.multicast_mode='1'
+        uci set network.bat0.network_coding='0'
+        uci set network.bat0.orig_interval='1000'
+        echo "bat0 interface has been created."
+
+        # Set the bat0 role
+        BAT_ROLE=$(uci -q get easymesh.config.role)
+        if [ "${BAT_ROLE}" == "server" ]; then
+            uci set network.bat0.gw_mode='server'
+        elif [ "${BAT_ROLE}" == "client" ]; then
+            uci set network.bat0.gw_mode='client'
+        else
+            uci set network.bat0.gw_mode='off'
+        fi
+
+        # Get the current list of ports for the 'br-lan' interface
+        LAN_PORTS=$(uci -q get network.@device[0].ports)
+        # Check if 'bat0' is already in the list of ports for 'br-lan'
+        if echo "$LAN_PORTS" | grep -q 'bat0'; then
+            uci del_list network.@device[0].ports='bat0'
+            echo "Old bat0 interface deleted from lan network."
+        fi
+
+        # Add 'bat0' to the list of ports for 'br-lan'
+        uci add_list network.@device[0].ports='bat0'
+        echo "bat0 has been added to the lan network."
+
         uci commit network
-        uci commit firewall
-        /etc/init.d/firewall restart
     fi
+}
 
-    if [ "$mesh_mesh" != "wifi-iface" ]; then
-        uci set wireless.mesh_$apall=wifi-iface
-        uci set wireless.mesh_$apall.device=$apall
-        uci set wireless.mesh_$apall.ifname=mesh_${apall}
-        uci set wireless.mesh_$apall.network=nwi_mesh_${apall}
-        uci set wireless.mesh_$apall.mode='mesh'
-        uci set wireless.mesh_$apall.mesh_id=$mesh_id
-        uci set wireless.mesh_$apall.mesh_fwding='1'
-        uci set wireless.mesh_$apall.mesh_ttl='1'
-        uci set wireless.mesh_$apall.mcast_rate='24000'
-        uci set wireless.mesh_$apall.disabled='0'
-        uci commit wireless
+find_radios() {
+    # Get the radio to be used for mesh from the config
+    AP_RADIO=$(uci -q get easymesh.config.apRadio)
+
+    # Check if AP_RADIO is empty, if so exit
+    if [ -z "$AP_RADIO" ]; then
+        echo "No radio specified in the config, exiting."
+        exit 1
     fi
 
-    if [ "$mesh_mesh" = "wifi-iface" ]; then
-        if [ "$mesh_apRadio" != "$apall" ]; then
-            uci set wireless.mesh_$apall.device=$apall
-            uci commit wireless
-        fi
+    # Check to make sure if "all" is passed or a single radio
+    if [ "$AP_RADIO" == "all" ]; then
+        # Get the list of wifi devices
+        WIFI_RADIOS=$(uci -X show wireless | awk -F'[.=]' '/wifi-device/ {print $2}' | tr '\n' ' ')
+    else
+        # Set the radio to the one passed in the config
+        WIFI_RADIOS=$AP_RADIO
     fi
+}
 
-    if [ "$encryption" != 1 ]; then
-        apnum="${mesh_apRadio#radio}"
-        apnum=$((apnum + 1))
-        found=0
-
-        # Check all existing wifinetX and remove if SSID matches with $mesh_id and mode is 'ap'
-        while uci get wireless.wifinet$apnum > /dev/null 2>&1; do
-            existing_ssid=$(uci get wireless.wifinet$apnum.ssid 2> /dev/null)
-            existing_mode=$(uci get wireless.wifinet$apnum.mode 2> /dev/null)
-            if [ "$existing_ssid" = "$mesh_id" ] && [ "$existing_mode" = "ap" ]; then
-                if [ $found -eq 0 ]; then
-                    found=1
-                else
-                    uci delete wireless.wifinet$apnum
-                fi
-            fi
-            apnum=$((apnum + 1))
+process_radios() {
+    # Check if WIFI_RADIOS contains more than one radio
+    if [[ $WIFI_RADIOS =~ [[:space:]] ]]; then
+        # Loop through all the radios and set them up
+        for radio in $WIFI_RADIOS; do
+            echo "Multiple Radio Setup, Current Radio: $radio"
+            setup_mesh_radio $radio
         done
-        uci commit wireless
+    else
+        echo "Calling Single Radio Setup: $WIFI_RADIOS"
+        setup_mesh_radio $WIFI_RADIOS
+    fi
+}
 
-        if [ $found -eq 0 ]; then
-            uci set wireless.mesh_$apall.encryption='none'
-    #       uci set wireless.mesh_$apall.disabled='0'
-            uci set wireless.wifinet$apnum=wifi-iface
-            uci set wireless.wifinet$apnum.device=$mesh_apRadio
-            uci set wireless.wifinet$apnum.mode='ap'
-            uci set wireless.wifinet$apnum.ssid=$mesh_id
-            uci set wireless.wifinet$apnum.encryption='none'
-            uci set wireless.wifinet$apnum.key=$key
-            uci set wireless.wifinet$apnum.ieee80211r='1'
-            uci set wireless.wifinet$apnum.mobility_domain=$mobility_domain
-            uci set wireless.wifinet$apnum.ft_over_ds='0'
-            uci set wireless.wifinet$apnum.ft_psk_generate_local='1'
-            uci set wireless.wifinet$apnum.network='lan'
-            uci set wireless.wifinet$apnum.disabled=0
-            uci commit wireless
-        fi
+# This is called from the process_radios function and is passed the radio to be used for mesh
+setup_mesh_radio() {
+    CURRENT_RADIO=$1
+    echo "Setting up radio: $CURRENT_RADIO"
+
+    # Get the mesh name from UCI config
+    MESH_NAME=$(uci -q get easymesh.config.mesh_id)
+
+    # Commit changes to wireless
+    uci commit wireless
+
+    uci set network.nwi_mesh_$CURRENT_RADIO=interface
+    uci set network.nwi_mesh_$CURRENT_RADIO.proto='batadv_hardif'
+    uci set network.nwi_mesh_$CURRENT_RADIO.master='bat0'
+    uci set network.nwi_mesh_$CURRENT_RADIO.device='bat0'
+    uci set network.nwi_mesh_$CURRENT_RADIO.mtu='1536'
+
+    uci set wireless.mesh_$CURRENT_RADIO=wifi-iface
+    uci set wireless.mesh_$CURRENT_RADIO.device=$CURRENT_RADIO
+    uci set wireless.mesh_$CURRENT_RADIO.ifname=mesh_$CURRENT_RADIO
+    uci set wireless.mesh_$CURRENT_RADIO.network=nwi_mesh_$CURRENT_RADIO
+    uci set wireless.mesh_$CURRENT_RADIO.mode='mesh'
+    uci set wireless.mesh_$CURRENT_RADIO.mesh_id=$MESH_NAME
+    uci set wireless.mesh_$CURRENT_RADIO.mesh_fwding='0'
+    uci set wireless.mesh_$CURRENT_RADIO.mesh_rssi_threshold='0'
+    uci set wireless.mesh_$CURRENT_RADIO.mesh_ttl='1'
+    uci set wireless.mesh_$CURRENT_RADIO.mcast_rate='24000'
+    uci set wireless.mesh_$CURRENT_RADIO.disabled='0'
+
+    uci commit wireless
+
+    # Extact the radio number from the radio name
+    RADIO_NUM="${CURRENT_RADIO#radio}"
+
+    # Get the mobility domain from the config
+    MOBILITY_DOMAIN=$(uci -q get easymesh.config.mobility_domain)
+
+    # If mobility domain is empty, set it to a random 4 digit hex number, then set it in the config
+    if [ -z "$MOBILITY_DOMAIN" ]; then
+        MOBILITY_DOMAIN=$(hexdump -n 2 -e '2/1 "%02x"' /dev/urandom)
+        uci set easymesh.config.mobility_domain=$MOBILITY_DOMAIN
+        uci commit easymesh
+    fi
 
+    # Get the encryption enabled from the config
+    ENCRYPTION_ENABLED=$(uci -q get easymesh.config.encryption)
+
+    # Setup the interface for the mesh network
+    uci set wireless.mesh_$CURRENT_RADIO.disabled='0'
+    uci set wireless.wifinet$RADIO_NUM=wifi-iface
+    uci set wireless.wifinet$RADIO_NUM.device=$CURRENT_RADIO
+    uci set wireless.wifinet$RADIO_NUM.mode='ap'
+    uci set wireless.wifinet$RADIO_NUM.ssid=$MESH_NAME
+    uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
+    uci set wireless.wifinet$RADIO_NUM.mobility_domain=$MOBILITY_DOMAIN
+    uci set wireless.wifinet$RADIO_NUM.ft_over_ds='0'
+    uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='0'
+    uci set wireless.wifinet$RADIO_NUM.network='lan'
+    uci set wireless.wifinet$RADIO_NUM.disabled=0
+
+    # Get the encryption key from the config
+    NETWORK_KEY=$(uci -q get easymesh.config.key)
+
+    # Check if encryption is enabled and if the key is not empty
+    if [ "$ENCRYPTION_ENABLED" = 1 ] && [ ! -z $NETWORK_KEY ]; then
+        uci set wireless.mesh_$CURRENT_RADIO.encryption='sae'
+        uci set wireless.mesh_$CURRENT_RADIO.key=$NETWORK_KEY
+        uci set wireless.wifinet$RADIO_NUM.encryption='sae-mixed'
+        uci set wireless.wifinet$RADIO_NUM.key=$NETWORK_KEY
     else
-        apnum="${mesh_apRadio#radio}"
-        apnum=$((apnum + 1))
-        found=0
-
-        # Check all existing wifinetX and remove if SSID matches with $mesh_id and mode is 'ap'
-        while uci get wireless.wifinet$apnum > /dev/null 2>&1; do
-            existing_ssid=$(uci get wireless.wifinet$apnum.ssid 2> /dev/null)
-            existing_mode=$(uci get wireless.wifinet$apnum.mode 2> /dev/null)
-            if [ "$existing_ssid" = "$mesh_id" ] && [ "$existing_mode" = "ap" ]; then
-                if [ $found -eq 0 ]; then
-                    found=1
-                else
-                    uci delete wireless.wifinet$apnum
-                fi
-            fi
-            apnum=$((apnum + 1))
-        done
-        uci commit wireless
+        uci set wireless.mesh_$CURRENT_RADIO.encryption='none'
+        uci set wireless.wifinet$RADIO_NUM.encryption='none' 
+        [ -z $NETWORK_KEY ] && echo "Encryption key is empty, so encryption was disabled."
+    fi
 
-        if [ $found -eq 0 ]; then
-            uci set wireless.mesh_$apall.encryption='sae'
-    #       uci set wireless.mesh_$apall.disabled='0'
-            uci set wireless.mesh_$apall.key=$key
-            uci set wireless.wifinet$apnum=wifi-iface
-            uci set wireless.wifinet$apnum.device=$apall
-            uci set wireless.wifinet$apnum.mode='ap'
-            uci set wireless.wifinet$apnum.ssid=$mesh_id
-            uci set wireless.wifinet$apnum.encryption='sae-mixed'
-            uci set wireless.wifinet$apnum.key=$key
-            uci set wireless.wifinet$apnum.ieee80211r='1'
-            uci set wireless.wifinet$apnum.mobility_domain=$mobility_domain
-            uci set wireless.wifinet$apnum.ft_over_ds='0'
-            uci set wireless.wifinet$apnum.ft_psk_generate_local='1'
-            uci set wireless.wifinet$apnum.network='lan'
-            uci set wireless.wifinet$apnum.disabled=0
-            uci commit wireless
-        fi
-fi
+    # Commit our block of changes to wireless
+    uci commit wireless
+
+    # Check if we need to setup kvr
+    ENABLE_KVR=$(uci -q get easymesh.config.kvr)
+
+    if [ "$ENABLE_KVR" = 1 ]; then
+        uci set wireless.wifinet$RADIO_NUM.ieee80211k='1'
+        uci set wireless.wifinet$RADIO_NUM.rrm_neighbor_report='1'
+        uci set wireless.wifinet$RADIO_NUM.rrm_beacon_report='1'
+        uci set wireless.wifinet$RADIO_NUM.ieee80211v='1'
+        uci set wireless.wifinet$RADIO_NUM.bss_transition='1'
+        uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
+        uci set wireless.wifinet$RADIO_NUM.ft_over_ds='1'
+        uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='1'
+        uci commit wireless
+    else
+        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211k
+        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211v
+        uci -q delete wireless.wifinet$RADIO_NUM.ieee80211r
+        uci commit wireless
+    fi
 
-}
+    # Check if we need to setup iapp
+    ENABLE_IAPP=$(uci -q get easymesh.config.iapp)
 
-add_kvr() {
-    kvr=$(uci -q get easymesh.config.kvr)
-    mobility_domain=$(uci -q get easymesh.config.mobility_domain)
-    iapp=$(uci -q get easymesh.config.iapp)
-    for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-        if [ "$kvr" = 1 ]; then
-            uci set wireless.default_$apall.ieee80211k='1'
-            uci set wireless.default_$apall.rrm_neighbor_report='1'
-            uci set wireless.default_$apall.rrm_beacon_report='1'
-            uci set wireless.default_$apall.ieee80211v='1'
-            uci set wireless.default_$apall.bss_transition='1'
-            uci set wireless.default_$apall.ieee80211r='1'
-            uci set wireless.default_$apall.encryption='sae'
-            uci set wireless.default_$apall.mobility_domain=$mobility_domain
-            uci set wireless.default_$apall.ft_over_ds='1'
-            uci set wireless.default_$apall.ft_psk_generate_local='1'
-            uci commit wireless
-        else
-            uci -q delete wireless.default_$apall.ieee80211k
-            uci -q delete wireless.default_$apall.ieee80211v
-            uci -q delete wireless.default_$apall.ieee80211r
-            uci commit wireless
-        fi
-        if [ "$iapp" = 1 ]; then
-            uci set wireless.default_$apall.iapp_interface='br-lan'
-            uci commit wireless
-        else
-            uci -q delete wireless.default_$apall.iapp_interface
+    if [ "$ENABLE_IAPP" = 1 ]; then
+        # Get the LAN interface name
+        LAN_NAME=$(uci -q get network.@device[0].name)
+        # If LAN_NAME is not empty, set the iapp interface
+        if [ ! -z "$LAN_NAME" ]; then
+            uci set wireless.wifinet$RADIO_NUM.iapp_interface="$LAN_NAME"
             uci commit wireless
-        fi
-    done
-}
-
-add_dawn() {
-    kvr=$(uci -q get easymesh.config.kvr)
-    rssi_val=$(uci -q get easymesh.config.rssi_val)
-    low_rssi_val=$(uci -q get easymesh.config.low_rssi_val)
+        fi 
+    else
+        uci -q delete wireless.wifinet$RADIO_NUM.iapp_interface
+        uci commit wireless
+    fi
 
-    if [ "$kvr" = 1 ]; then
-        uci set dawn.@metric[0].rssi_val=$rssi_val
-        uci set dawn.@metric[0].low_rssi_val=$low_rssi_val
+    # If KVR is enabled, setup DAWN
+    if [ "$ENABLE_KVR" = 1 ]; then
+        RSSI=$(uci -q get easymesh.config.rssi_val)
+        LOW_RSSI=$(uci -q get easymesh.config.low_rssi_val)  
+        uci set dawn.@metric[0].rssi_val=$RSSI
+        uci set dawn.@metric[0].low_rssi_val=$LOW_RSSI
         uci commit dawn
         /etc/init.d/dawn enable && /etc/init.d/dawn start
     else
         /etc/init.d/dawn stop && /etc/init.d/dawn disable
     fi
+
+    # Commit our block of changes to the configs
+    uci commit
 }
 
-set_easymesh() {
-    if [ "$enable" = 1 ]; then
-        if [ "$mesh_bat0" != "interface" ]; then
-            uci set network.bat0=interface
-            uci set network.bat0.proto='batadv'
-            uci set network.bat0.routing_algo='BATMAN_IV'
-            uci set network.bat0.aggregated_ogms='1'
-            uci set network.bat0.ap_isolation='0'
-            uci set network.bat0.bonding='1'
-            uci set network.bat0.bridge_loop_avoidance='1'
-            uci set network.bat0.distributed_arp_table='1'
-            uci set network.bat0.fragmentation='1'
-            # uci set network.bat0.gw_bandwidth='10000/2000'
-            # uci set network.bat0.gw_sel_class='20'
-            uci set network.bat0.hop_penalty='30'
-            uci set network.bat0.isolation_mark='0x00000000/0x00000000'
-            uci set network.bat0.log_level='0'
-            uci set network.bat0.multicast_fanout='16'
-            uci set network.bat0.multicast_mode='1'
-            uci set network.bat0.network_coding='0'
-            uci set network.bat0.orig_interval='1000'
-
-            if [ "$role" = "server" ]; then
-                uci set network.bat0.gw_mode='server'
-            elif [ "$role" = "client" ]; then
-                uci set network.bat0.gw_mode='client'
-            else
-                uci set network.bat0.gw_mode='off'
-            fi
+restart_and_reload() {
+    # Enable all the radios and commit the changes at once
+    for radio in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
+        echo "Enabling $radio..."
+        uci set wireless.$radio.disabled=0
+    done
+    uci commit
+    echo "All radios enabled."
 
-            if [ "$brlan" = "br-lan" ]; then
-                uci add_list network.@device[0].ports='bat0'
-            else
-                uci set network.lan.ifname="${lan} bat0"
-            fi
+    # Apply the wireless configuration changes
+    wifi reload
+    echo "Wireless interfaces reloaded."
+
+    # Apply network configuration changes
+    # Note: Only use reload_config if you have made changes to the network config
+    # and need to apply them. Otherwise, you can skip this step.
+    reload_config
+    echo "Network configuration reloaded."
+
+    /etc/init.d/network reload
+    /etc/init.d/network restart
+}
+
+disable_easymesh() {
+    # Delete the bat0 interface
+    if [ "$(uci -q get network.bat0)" = "interface" ]; then
+        uci del network.bat0
+    fi
+
+    # Get the current list of ports for the 'br-lan' interface
+    LAN_PORTS=$(uci -q get network.@device[0].ports)
+    # Check if 'bat0' is already in the list of ports for 'br-lan'
+    if echo "$LAN_PORTS" | grep -q 'bat0'; then
+        uci del_list network.@device[0].ports='bat0'
+        echo "Old bat0 interface deleted from lan network."
+    fi
+
+    # Get the list of wifi devices
+    WIFI_RADIOS=$(uci -X show wireless | awk -F'[.=]' '/wifi-device/ {print $2}' | tr '\n' ' ')
 
+    # Loop through all the radios and delete the network interfaces
+    for CURRENT_RADIO in $WIFI_RADIOS; do
+        echo "Handling removal of mesh networks for: $CURRENT_RADIO"
+        if [ "$(uci -q get network.nwi_mesh_$CURRENT_RADIO)" = "interface" ]; then
+            uci del network.nwi_mesh_$CURRENT_RADIO
             uci commit network
-        fi # end [ "$mesh_bat0" != "interface" ]
-
-        # When this is called, the add_wifi_mesh function does not load variables properly
-        if [ "$apRadio" = "all" ]; then
-            for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-                add_wifi_mesh
-                add_kvr
-                add_dawn
-            done
-        else
-            apall=$apRadio
-            add_wifi_mesh
-            add_kvr
-            add_dawn
         fi
+    done
+
+    uci commit
 
-        if [ "$ap_mode" = 1 ]; then
-            # Backup Configurations if your scared
-            cp /etc/config/wireless /etc/config/wireless.meshbak
-            cp /etc/config/network /etc/config/network.meshbak
-            cp /etc/config/dhcp /etc/config/dhcp.meshbak
-
-            # Generate a random IP in the same subnet for fun
-            ip_base=$(echo "$dns" | cut -d'.' -f1-3)  # Get the first three octets of the DNS IP
-            last_octet=$((RANDOM % 254 + 1))  # Generate a random value for the last octet between 1 and 254
-            nodeip="${ip_base}.${last_octet}"  # Concatenate the base IP with the new last octet
-
-            # random static IP just in case
-            #uci set network.lan.ipaddr=$nodeip  # Set the randomly chosen IP
-
-            # Do not need these running
-            for i in firewall dnsmasq odhcpd; do
-            if /etc/init.d/"$i" enabled; then
-                /etc/init.d/"$i" disable
-                /etc/init.d/"$i" stop
+    reload_config
+    echo "Network configuration reloaded."
+
+    /etc/init.d/network reload
+    /etc/init.d/network restart
+}
+
+set_apmode() {
+    AP_MODE=$(uci -q get easymesh.config.ap_mode)
+    if [ "$AP_MODE" = 1 ]; then
+        # Set a flag to indicate that we are in AP mode
+        # When we go to disable easymesh, we will check this flag and if it was set we restore settings
+        uci set easymesh.config.ap_mode_enabled=1
+
+        # Backup our configs
+        rm /etc/config/*.meshbak
+        cp /etc/config/wireless /etc/config/wireless.meshbak
+        cp /etc/config/network /etc/config/network.meshbak
+        cp /etc/config/dhcp /etc/config/dhcp.meshbak
+
+        # Generate a random IP in the same subnet for fun
+        # ip_base=$(echo "$dns" | cut -d'.' -f1-3)  # Get the first three octets of the DNS IP
+        # last_octet=$((RANDOM % 254 + 1))  # Generate a random value for the last octet between 1 and 254
+        # nodeip="${ip_base}.${last_octet}"  # Concatenate the base IP with the new last octet
+
+        # Disabling and stopping services not needed
+        for service in firewall dnsmasq odhcpd; do
+            if /etc/init.d/$service enabled; then
+                echo "Disabling and stopping $service..."
+                /etc/init.d/$service disable
+                /etc/init.d/$service stop
+            else
+                echo "$service is not enabled, skipping..."
             fi
-            done
-
-            # Set LAN interface to DHCP client
-            uci set network.lan.proto='dhcp'
-            uci delete network.wan
-            uci delete network.wan6
-            uci delete network.lan.ipaddr
-            uci delete network.lan.netmask
-
-            # Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
-            # Comment out because we want to pull this from dhcp
-            # uci set network.lan.netmask=$netmask
-            # uci set network.lan.gateway=$dns
-            uci set system.@system[0].hostname=$gateway
-
-            # Configure LAN bridge and add ethernet interfaces to the bridge
-            uci del network.@device[0].ports
-            uci add_list network.@device[0].ports='bat0'
-            uci add_list network.@device[0].ports='eth0'
-            uci add_list network.@device[0].ports='lan1'
-            uci add_list network.@device[0].ports='lan2'
-            uci add_list network.@device[0].ports='wan'
-            uci set network.lan.type='bridge'
+        done
 
-            # Make sure the Wi-Fi is part of the lan 
-            uci set wireless.wifinet1.network='lan nwi_mesh_${apall} wwan'
+        # Set LAN interface to DHCP client
+        uci del network.lan.ipaddr
+        uci del network.lan.netmask
+        uci set network.lan.proto='dhcp'
+        uci del network.wan
+        uci del network.wan6
 
-            # Commit all changes
-            uci commit
+        # Fix firewall to be disabled
+        uci del firewall.lan.network
+        uci del firewall.wan.network
 
-            # Restart the network to apply changes
-            /etc/init.d/network restart
-            /etc/init.d/system reload
+        # Fix dhcp to be disabled
+        uci set dhcp.lan.ignore='1'
+        uci del dhcp.wan
 
-            # restart wifi
-            wifi reload
-            wifi up
+        # Fix this for proper variable name
+        HOSTNAME=$(uci -q get easymesh.config.gateway)
+        # Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
+        uci set system.@system[0].hostname=$HOSTNAME
 
-            # Removing firewall configuration
-            mv /etc/config/firewall /etc/config/firewall.unused
+        # Retrieve the list of ports for network.@device[0]
+        LAN_PORTS=$(uci get network.@device[0].ports)
 
+        # Check if 'wan' is already in the list of ports
+        if echo "$LAN_PORTS" | grep -q -w 'wan'; then
+            echo "'wan' is already in the list of ports for lan."
         else
-            stop_node
-        fi # end if [ "$ap_mode" = 1 ]
-    else
-        # Disable the ap_mode settings
-        stop_node
-        
-        if [ "$mesh_bat0" = "interface" ]; then
-                uci -q delete network.bat0
-                if [ "$brlan" = "br-lan" ]; then
-                        uci -q del_list network.@device[0].ports='bat0'
-                else
-                        sed -i 's/ bat0//' /etc/config/network
-                fi
-                uci commit network
+            echo "'wan' is not in the list. Adding it to lan ports..."
+            uci add_list network.@device[0].ports='wan'
         fi
 
-        for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-            mesh_nwi_mesh=$(uci -q get network.nwi_mesh_${apall})
-            mesh_mesh=$(uci -q get wireless.mesh_${apall})
-
-            if [ "$mesh_nwi_mesh" = "interface" ]; then
-                uci -q delete network.nwi_mesh_$apall
-                uci commit network
-            fi
-
-            if [ "$mesh_mesh" = "wifi-iface" ]; then
-                uci -q delete wireless.mesh_$apall
-                uci commit wireless
+        # Find all radios we are using in our setup
+        find_radios
+
+        #### COME BACK TO THIS ####
+        # # Check if WIFI_RADIOS contains more than one radio
+        # if [[ $WIFI_RADIOS =~ [[:space:]] ]]; then
+        #     # Loop through all the radios add nwimesh to the that network
+        #     for cur_radio in $WIFI_RADIOS; do
+        #         echo "Multiple Radio Setup, Current Radio: $radio"
+        #         # Extact the radio number from the radio name
+        #         wifi_num="${cur_radio#radio}"
+        #         uci set wireless.wifinet${wifi_num}.network="lan nwi_mesh_${cur_radio}"
+        #     done
+        # else
+        #     echo "Calling Single Radio Setup: $WIFI_RADIOS"
+        #     # Extact the radio number from the radio name
+        #     wifi_num="${WIFI_RADIOS#radio}"
+        #     uci set wireless.wifinet${wifi_num}.network="lan nwi_mesh_${WIFI_RADIOS}"
+        # fi
+
+        uci commit
+        # Tell openwrt to reload the configs
+        reload_config
+    else
+        # Set a flag to indicate that we are in AP mode
+        uci set easymesh.config.ap_mode_enabled=0
+
+        # Restore our configs
+        [ -f /etc/config/wireless.meshbak ] && {
+            mv /etc/config/wireless /etc/config/wireless.dumbap
+            cp /etc/config/wireless.meshbak /etc/config/wireless
+        }
+        [ -f /etc/config/network.meshbak ] && {
+            mv /etc/config/network /etc/config/network.dumbap
+            cp /etc/config/network.meshbak /etc/config/network
+        }
+        [ -f /etc/config/dhcp.meshbak ] && {
+            mv /etc/config/dhcp /etc/config/dhcp.dumbap
+            cp /etc/config/dhcp.meshbak /etc/config/dhcp
+        }
+
+        # Enable and start services not needed
+        for service in firewall dnsmasq odhcpd; do
+            if /etc/init.d/$service disabled; then
+                echo "Enabling and starting $service..."
+                /etc/init.d/$service enable
+                /etc/init.d/$service start
+            else
+                echo "$service is not disabled, skipping..."
             fi
         done
-    fi
 
-    /etc/init.d/network restart
-} # end set_easymesh()
+        reload_config
+        /etc/init.d/network reload
+    fi
+}
 
-# Call our functions set above
-load_easymesh_config
-set_easymesh
+# ENABLED=$(uci -q get easymesh.config.enabled)
+# if [ "$ENABLED" = 1 ]; then
+#     clear_old_networks
+#     create_bat0
+#     find_radios
+#     process_radios
+#     restart_and_reload
+# else
+#     clear_old_networks
+#     disable_easymesh
+# fi
+
+# We accept the parameters: start, stop and apmode
+# start: Enables easymesh
+# stop: Disables easymesh
+# apmode: Sets the device to AP mode
+if [ "$1" = "start" ]; then
+    clear_old_networks
+    create_bat0
+    find_radios
+    process_radios
+    restart_and_reload
+elif [ "$1" = "stop" ]; then
+    clear_old_networks
+    disable_easymesh
+# elif [ "$1" = "apmode" ]; then
+#     set_apmode
+else
+    echo "Invalid parameter passed."
+fi