diff --git a/Makefile b/Makefile
index e4c6658..434f5f8 100755
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 
 LUCI_TITLE:=LuCI Support for easymesh
 LUCI_DEPENDS:= +kmod-cfg80211 +batctl-default +kmod-batman-adv +dawn +bash
-PKG_VERSION:=2.8.6
+PKG_VERSION:=2.8.7
 
 include $(TOPDIR)/feeds/luci/luci.mk
 
diff --git a/root/easymesh/dumbap.sh b/root/easymesh/dumbap.sh
old mode 100644
new mode 100755
index e69de29..3d3480e
--- a/root/easymesh/dumbap.sh
+++ b/root/easymesh/dumbap.sh
@@ -0,0 +1,105 @@
+#!/bin/bash
+
+set_apmode() {
+    AP_MODE=$(uci -q get easymesh.config.ap_mode)
+    if [ "$AP_MODE" = 1 ]; then
+        # Set a flag to indicate that we are in AP mode
+        # When we go to disable easymesh, we will check this flag and if it was set we restore settings
+        uci set easymesh.config.ap_mode_enabled=1
+
+        # Backup our configs
+        rm /etc/config/*.meshbak
+        cp /etc/config/wireless /etc/config/wireless.meshbak
+        cp /etc/config/network /etc/config/network.meshbak
+        cp /etc/config/dhcp /etc/config/dhcp.meshbak
+
+        # Disabling and stopping services not needed
+        for service in firewall dnsmasq odhcpd; do
+            if /etc/init.d/$service enabled; then
+                echo "Disabling and stopping $service..."
+                /etc/init.d/$service disable
+                /etc/init.d/$service stop
+            else
+                echo "$service is not enabled, skipping..."
+            fi
+        done
+
+        # Set LAN interface to DHCP client
+        uci del network.lan.ipaddr
+        uci del network.lan.netmask
+        uci set network.lan.proto='dhcp'
+        uci del network.wan
+        uci del network.wan6
+
+        # Fix firewall to be disabled
+        uci del firewall.lan.network
+        uci del firewall.wan.network
+
+        # Fix dhcp to be disabled
+        uci set dhcp.lan.ignore='1'
+        uci del dhcp.wan
+
+        # Fix this for proper variable name
+        HOSTNAME=$(uci -q get easymesh.config.hostname)
+        # Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
+        uci set system.@system[0].hostname=$HOSTNAME
+
+        # Retrieve the list of ports for network.@device[0]
+        LAN_PORTS=$(uci get network.@device[0].ports)
+
+        # Check if 'wan' is already in the list of ports
+        if echo "$LAN_PORTS" | grep -q -w 'wan'; then
+            echo "'wan' is already in the list of ports for lan."
+        else
+            echo "'wan' is not in the list. Adding it to lan ports..."
+            uci add_list network.@device[0].ports='wan'
+        fi
+
+        # Get the radio to be used for mesh from the config
+        AP_RADIO=$(uci -q get easymesh.config.apRadio)
+
+        # # Loop through the selected radios
+        # for CURRENT_RADIO in $AP_RADIO; do
+        #     echo "Multiple Radio Setup, Current Radio: $CURRENT_RADIO"
+        #     # Extact the radio number from the radio name
+        #     wifi_num="${cur_radio#CURRENT_RADIO}"
+        #     uci set wireless.wifinet${wifi_num}.network="lan private_router_batman"
+        # done
+
+        uci commit
+        # Tell openwrt to reload the configs
+        reload_config
+        /etc/init.d/network reload
+    else
+        # Set a flag to indicate that we are in AP mode
+        uci set easymesh.config.ap_mode_enabled=0
+
+        # Restore our configs
+        [ -f /etc/config/wireless.meshbak ] && {
+            mv /etc/config/wireless /etc/config/wireless.dumbap
+            cp /etc/config/wireless.meshbak /etc/config/wireless
+        }
+        [ -f /etc/config/network.meshbak ] && {
+            mv /etc/config/network /etc/config/network.dumbap
+            cp /etc/config/network.meshbak /etc/config/network
+        }
+        [ -f /etc/config/dhcp.meshbak ] && {
+            mv /etc/config/dhcp /etc/config/dhcp.dumbap
+            cp /etc/config/dhcp.meshbak /etc/config/dhcp
+        }
+
+        # Enable and start services not needed
+        for service in firewall dnsmasq odhcpd; do
+            if /etc/init.d/$service disabled; then
+                echo "Enabling and starting $service..."
+                /etc/init.d/$service enable
+                /etc/init.d/$service start
+            else
+                echo "$service is not disabled, skipping..."
+            fi
+        done
+
+        reload_config
+        /etc/init.d/network reload
+    fi
+}
\ No newline at end of file
diff --git a/root/easymesh/easymesh.sh b/root/easymesh/easymesh.sh
index 2d35e95..d1e2454 100644
--- a/root/easymesh/easymesh.sh
+++ b/root/easymesh/easymesh.sh
@@ -4,62 +4,41 @@ clear_mesh_radio() {
     # Get the radio to be used for mesh from the config
     AP_RADIO=$(uci -q get easymesh.config.apRadio)
     # Get the mesh name from the UCI configuration
-    MESH_NAME=$(uci -q get easymesh.config.mesh_id)
+    OLD_MESH_NAME=$(uci -q get easymesh.config.old_mesh_id)
 
     # Check if MESH_NAME is not empty
-    if [ -z "$MESH_NAME" ]; then
-        echo "Mesh name is not set. Please check the easymesh configuration."
-        exit 1
+    if [ -z "$OLD_MESH_NAME" ]; then
+        echo "Old mesh name is not set. None to clear."
+        return;
     fi
 
     # Get the output from uci show wireless
     uci_output=$(uci show wireless)
 
     # Find the mesh network with the matching mesh_id and delete it
-    mesh_id=$(echo "$uci_output" | grep -o "wireless\.mesh_radio[0-9]*\.mesh_id='$MESH_NAME'")
+    mesh_id=$(echo "$uci_output" | grep -o "wireless\.mesh_radio[0-9]*\.mesh_id='$OLD_MESH_NAME'")
     if [ ! -z "$mesh_id" ]; then
         # Extract the number from the interface name
-        mesh_num=$(echo "$mesh_id" | grep -o "[0-9]*")
-        if [ "$AP_RADIO" == "all" ]; then
-            # Loop through all of the radios and delete the mesh networks
-            for radio in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-                # Delete the network
-                uci del wireless.mesh_$radio
-                echo "Deleted mesh network with mesh_id '$MESH_NAME' on radio$radio"
-            done
-            ## Delete the network
-            #uci del wireless.mesh_radio$mesh_num
-            #echo "Deleted mesh network with mesh_id '$MESH_NAME' on radio$mesh_num"
-        elif [ "$mesh_num" == `echo "$AP_RADIO" | grep -o "[0-9]*"` ]; then
+        mesh_radio=$(echo "$mesh_id" | grep -o "radio[0-9]*")
+        # Loop through radios and delete the mesh networks
+        for radio in $AP_RADIO; do
             # Delete the network
-            uci del wireless.mesh_$mesh_num
-            echo "Deleted mesh network with mesh_id '$MESH_NAME' on radio$mesh_num"
-        else
-            echo "Skipping mesh network with mesh_id '$MESH_NAME' on radio$mesh_num"
-        fi
+            uci del wireless.mesh_$radio
+            echo "Deleted mesh network with mesh_id '$OLD_MESH_NAME' on $radio"
+        done
     fi
 
     # Find the wireless network with the matching ssid and delete it
-    ssid=$(echo "$uci_output" | grep -o "wireless\.wifinet[0-9]*\.ssid='$MESH_NAME'")
+    ssid=$(echo "$uci_output" | grep -o "wireless\.wifinet[0-9]*\.ssid='$OLD_MESH_NAME'")
     if [ ! -z "$ssid" ]; then
-        # Extract the number from the interface name
-        ssid_num=$(echo "$ssid" | grep -o "[0-9]*")
-        if [ "$AP_RADIO" == "all" ]; then
-            # Loop through all of the radios and delete the wireless networks
-            for radio in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-                # Get the number from the radio name
-                radio_num="${radio#radio}"
-                # Delete the network
-                uci del wireless.wifinet$radio_num
-                echo "Deleted wireless network with ssid '$MESH_NAME' on radio$radio_num"
-            done
-        elif [ "$ssid_num" == "`echo "$AP_RADIO" | grep -o "[0-9]*"`" ]; then
+        # Loop through  radios and delete the wireless networks
+        for radio in $AP_RADIO; do
+            # Get the number from the radio name
+            radio_num="${radio#radio}"
             # Delete the network
-            uci del wireless.wifinet$ssid_num
-            echo "Deleted wireless network with ssid '$MESH_NAME' on radio$ssid_num"
-        else
-            echo "Skipping wireless network with ssid '$MESH_NAME' on radio$ssid_num"
-        fi
+            uci del wireless.wifinet$radio_num
+            echo "Deleted wireless network with ssid '$OLD_MESH_NAME' on radio$radio_num"
+        done
     fi
 
     # Commit changes to make sure the wireless configuration is updated
@@ -141,17 +120,8 @@ process_radios() {
         exit 1
     fi
 
-    # Determine which radios to process
-    if [ "$AP_RADIO" == "all" ]; then
-        # If 'all' is specified, get all the radios
-        RADIO_LIST=$(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}')
-    else
-        # If a specific radio is specified, use only that radio
-        RADIO_LIST=$AP_RADIO
-    fi  
-
     # Loop through the selected radios
-    for CURRENT_RADIO in $RADIO_LIST; do
+    for CURRENT_RADIO in $AP_RADIO; do
         echo "Setting up mesh networks for: $CURRENT_RADIO"
         setup_mesh_radio $CURRENT_RADIO
     done     
@@ -275,18 +245,11 @@ restart_and_reload() {
         exit 1
     fi
 
-    # Check to make sure if "all" is passed or a single radio
-    if [ "$AP_RADIO" == "all" ]; then
-        # If 'all' is specified, enable all radios
-        for radio in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
-            echo "Enabling $radio..."
-            uci set wireless.$radio.disabled=0
-        done
-    else
-        # If a specific radio is specified, enable only that radio
-        echo "Enabling $AP_RADIO..."
-        uci set wireless.$AP_RADIO.disabled=0
-    fi
+    # Enable radios
+    for radio in $AP_RADIO; do
+        echo "Enabling $radio..."
+        uci set wireless.$radio.disabled=0
+    done
 
     uci commit wireless
 
@@ -319,135 +282,31 @@ disable_batman_interfaces() {
     echo "Network configuration reloaded."
 }
 
-set_apmode() {
-    AP_MODE=$(uci -q get easymesh.config.ap_mode)
-    if [ "$AP_MODE" = 1 ]; then
-        # Set a flag to indicate that we are in AP mode
-        # When we go to disable easymesh, we will check this flag and if it was set we restore settings
-        uci set easymesh.config.ap_mode_enabled=1
-
-        # Backup our configs
-        rm /etc/config/*.meshbak
-        cp /etc/config/wireless /etc/config/wireless.meshbak
-        cp /etc/config/network /etc/config/network.meshbak
-        cp /etc/config/dhcp /etc/config/dhcp.meshbak
-
-        # Disabling and stopping services not needed
-        for service in firewall dnsmasq odhcpd; do
-            if /etc/init.d/$service enabled; then
-                echo "Disabling and stopping $service..."
-                /etc/init.d/$service disable
-                /etc/init.d/$service stop
-            else
-                echo "$service is not enabled, skipping..."
-            fi
-        done
-
-        # Set LAN interface to DHCP client
-        uci del network.lan.ipaddr
-        uci del network.lan.netmask
-        uci set network.lan.proto='dhcp'
-        uci del network.wan
-        uci del network.wan6
-
-        # Fix firewall to be disabled
-        uci del firewall.lan.network
-        uci del firewall.wan.network
-
-        # Fix dhcp to be disabled
-        uci set dhcp.lan.ignore='1'
-        uci del dhcp.wan
-
-        # Fix this for proper variable name
-        HOSTNAME=$(uci -q get easymesh.config.hostname)
-        # Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
-        uci set system.@system[0].hostname=$HOSTNAME
-
-        # Retrieve the list of ports for network.@device[0]
-        LAN_PORTS=$(uci get network.@device[0].ports)
-
-        # Check if 'wan' is already in the list of ports
-        if echo "$LAN_PORTS" | grep -q -w 'wan'; then
-            echo "'wan' is already in the list of ports for lan."
-        else
-            echo "'wan' is not in the list. Adding it to lan ports..."
-            uci add_list network.@device[0].ports='wan'
-        fi
-
-        # Get the radio to be used for mesh from the config
-        AP_RADIO=$(uci -q get easymesh.config.apRadio)
-
-        # Determine which radios to process
-        if [ "$AP_RADIO" == "all" ]; then
-            # If 'all' is specified, get all the radios
-            RADIO_LIST=$(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}')
-        else
-            # If a specific radio is specified, use only that radio
-            RADIO_LIST=$AP_RADIO
-        fi
-
-        # # Loop through the selected radios
-        # for CURRENT_RADIO in $RADIO_LIST; do
-        #     echo "Multiple Radio Setup, Current Radio: $CURRENT_RADIO"
-        #     # Extact the radio number from the radio name
-        #     wifi_num="${cur_radio#CURRENT_RADIO}"
-        #     uci set wireless.wifinet${wifi_num}.network="lan private_router_batman"
-        # done
-
-        uci commit
-        # Tell openwrt to reload the configs
-        reload_config
-        /etc/init.d/network reload
-    else
-        # Set a flag to indicate that we are in AP mode
-        uci set easymesh.config.ap_mode_enabled=0
-
-        # Restore our configs
-        [ -f /etc/config/wireless.meshbak ] && {
-            mv /etc/config/wireless /etc/config/wireless.dumbap
-            cp /etc/config/wireless.meshbak /etc/config/wireless
-        }
-        [ -f /etc/config/network.meshbak ] && {
-            mv /etc/config/network /etc/config/network.dumbap
-            cp /etc/config/network.meshbak /etc/config/network
-        }
-        [ -f /etc/config/dhcp.meshbak ] && {
-            mv /etc/config/dhcp /etc/config/dhcp.dumbap
-            cp /etc/config/dhcp.meshbak /etc/config/dhcp
-        }
-
-        # Enable and start services not needed
-        for service in firewall dnsmasq odhcpd; do
-            if /etc/init.d/$service disabled; then
-                echo "Enabling and starting $service..."
-                /etc/init.d/$service enable
-                /etc/init.d/$service start
-            else
-                echo "$service is not disabled, skipping..."
-            fi
-        done
-
-        reload_config
-        /etc/init.d/network reload
-    fi
-}
-
 # Enable easymesh
 enable_easymesh() {
+    # Clear old radios then set "old values"
     clear_mesh_radio
+    uci set easymesh.config.old_mesh_id="$(uci -q get easymesh.config.mesh_id)"
     create_batman_network
     process_radios
     restart_and_reload
+    # Set at end to be sure it worked
+    uci set easymesh.config.running=1
 }
 
 # Disable easymesh
 disable_easymesh() {
+    # Clear old radios then clear "old values"
     clear_mesh_radio
+    uci del easymesh.config.old_mesh_id
     disable_batman_interfaces
+    # Set at end to be sure it worked
+    uci del easymesh.config.running
 }
 
 # Check if enabled
-if [ "$(uci -q get easymesh.config.enabled)" = 0 ]; then
-    echo "Easymesh is disabled, exiting."
-    exit 1
+if [ "$(uci -q get easymesh.config.enabled)" = 1 ]; then
+    enable_easymesh
+else
+    disable_easymesh
 fi