diff --git a/Makefile b/Makefile
index 9394995..fdc148c 100755
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 
 LUCI_TITLE:=LuCI Support for easymesh
 LUCI_DEPENDS:= +kmod-cfg80211 +batctl-default +kmod-batman-adv +dawn +bash
-PKG_VERSION:=2.8.9
+PKG_VERSION:=2.8.10
 
 include $(TOPDIR)/feeds/luci/luci.mk
 
diff --git a/luasrc/model/cbi/easymesh.lua b/luasrc/model/cbi/easymesh.lua
index 5bcc2f7..9ac67e5 100755
--- a/luasrc/model/cbi/easymesh.lua
+++ b/luasrc/model/cbi/easymesh.lua
@@ -31,89 +31,52 @@ function detect_Node()
 end
 
 
-function get_verbose_hw_info(iface)
+local function get_verbose_hw_info(iface)
     local type = iwinfo.type(iface)
-    if not type then
-        return "Generic"
-    end
+    if not type then return "Generic" end
 
     local driver = iwinfo[type]
-    if not driver then
-        return "Driver not supported"
-    end
+    if not driver then return "Driver not supported" end
 
-    local hw_name = driver.hardware_name and driver.hardware_name(iface)
-    if not hw_name or hw_name == "" then
-        hw_name = "Unknown hardware"
-    end
-    
-    local hw_modes = driver.hwmodelist and driver.hwmodelist(iface)
+    local hw_name = driver.hardware_name and driver.hardware_name(iface) or "Unknown hardware"
+    local hw_modes = driver.hwmodelist and driver.hwmodelist(iface) or {}
     local supported_modes = {}
-    if hw_modes then
-        for mode, supported in pairs(hw_modes) do
-            if supported then
-                table.insert(supported_modes, mode)
-            end
+    
+    for mode, supported in pairs(hw_modes) do
+        if supported then
+            supported_modes[#supported_modes + 1] = mode
         end
     end
 
-    if #supported_modes == 0 then
-        supported_modes_str = "No mode information"
-    else
-        supported_modes_str = table.concat(supported_modes, "/")
-    end
-    local verbose_info = hw_name .. " (" .. supported_modes_str .. ")"
-    return verbose_info
+    return hw_name .. " (" .. (#supported_modes > 0 and table.concat(supported_modes, "/") or "No mode information") .. ")"
 end
 
 local Nodes = luci.sys.exec("batctl n 2>/dev/null| tail +3 | wc -l")
 local Node = detect_Node()
-v = m:section(Table, Node, translate("Active Nodes") ,"<b>" .. translate("Number of Active Nodes: ") .. Nodes .. "</b>")
+v = m:section(Table, Node, translate("Mesh Status") ,"<b>" .. translate("Number of Active Nodes: ") .. Nodes .. "</b>")
 v:option(DummyValue, "IF", translate("Interface"))
 v:option(DummyValue, "Neighbor", translate("Neighbor Nodes"))
 v:option(DummyValue, "lastseen", translate("Last Seen Timestamp"))
 
--- Basic
 s = m:section(TypedSection, "easymesh", translate("Mesh Settings"))
 s.anonymous = true
 
--- Connection Type Dropdown
---o = s:option(ListValue, "backbone", translate("Connection Type"), translate("Choose if Node or Gateway is connected to internet by LAN or WiFi"))
---o:value("lan", translate("LAN"))
---o:value("wifi", translate("WiFi"))
---o.default = "lan"
---o.rmempty = false
-
--- AP Name
---apn = s:option(Value, "apname", translate("AP Name"), translate("Enter the client WiFi AP name"))
---apn:depends("backbone", "wifi")
---apn.placeholder = "easymesh_AC"
---apn.rmempty = true
-
--- AP Password
---app = s:option(Value, "appass", translate("AP Password"), translate("Enter the client WiFi AP password"))
---app:depends("backbone", "wifi")
---app.password = true
---app.placeholder = "easymesh"
---app.rmempty = true
-
 s:tab("setup", translate("Basic Setup"))
 s:tab("apmode", translate("AP Mode"))
 s:tab("advanced", translate("Advanced Settings"))
 
 ---- Eanble
-o = s:taboption("setup", Flag, "enabled", translate("Enable Mesh Network"), translate("Toggle this switch to activate or deactivate the Mesh Network on this device according to the settings specified in this configuration. Make sure to configure all necessary settings before enabling the Mesh Network. Changes will apply when you click Save and Apply"))
+o = s:taboption("setup", Flag, "enabled", translate("Enable Mesh Networking"), translate('<p style="text-align: justify; padding: 0;">Toggle this switch to activate or deactivate the Mesh Network on this device according to the settings specified in this configuration. Make sure to configure all necessary settings before enabling the Mesh Network. </p><p style="text-align: justify; padding: 0;"><strong>Changes will apply when you click Save and Apply</strong></p>'))
 o.default = 0
 
-
 -- Move basic settings under the "Setup" tab
 o = s:taboption("setup", ListValue, "role", translate("Mesh Mode"), translate('<p style="text-align: justify; padding: 0;"><strong>Choose the role this device will play in your mesh network. There are two options available:</strong></p> <p style="text-align: justify; padding: 0;"><strong>1. Server:</strong> If you select this option, this device will act as the Mesh Gateway Server. The server manages the routing of data in the network and handles connections to the internet. It is the central point of your mesh network.</p> <p style="text-align: justify; padding: 0;"><strong>2. Node:</strong> The device functions as a Mesh Node if this option is selected. Nodes connect to the Mesh Gateway Server and other nodes to extend the range of the network. Nodes can also route traffic between each other to increase network efficiency.</p> <p style="text-align: justify; padding: 0;"><strong>Remember to set up the Mesh Gateway Server first before setting up the nodes.</strong></p>'))
 o:value("server", translate("Server"))
 o:value("off", translate("Node"))
+o:value("client", translate("Client"))
 o.default = "server"
---o:value("client", translate("Client (advanced)"))
 
-apRadio = s:taboption("setup", MultiValue, "apRadio", translate("Mesh Radio(s)"), translate('<p style="text-align: justify; padding: 0;">Select one or multiple radio interfaces to be used for the mesh network. Each selected radio interface will be configured to participate in the mesh network, extending its range and improving its resilience. By using multiple radios, your mesh network can balance the network load and handle a larger number of connected devices.</p>'))
+apRadio = s:taboption("setup", MultiValue, "apRadio", translate("Mesh Radio(s)"), translate('<p style="text-align: justify; padding: 0;">Select one or multiple radio interfaces to be used for the mesh network. Each selected radio interface will be configured to participate in the mesh network, extending its range and improving its resilience. By using multiple radios, your mesh network can balance the network load and handle a larger number of connected devices.</p><strong><p style="text-align: justify; padding: 0;">Ensure the radios you select support mesh networking</p></strong>'))
 
 uci:foreach("wireless", "wifi-device",
     function(s)
@@ -125,54 +88,37 @@ uci:foreach("wireless", "wifi-device",
 apRadio.default = "radio0"
 apRadio.widget = "select"
 
-o = s:taboption("setup", Value, "mesh_id", translate("Mesh SSID"))
+o = s:taboption("setup", Value, "mesh_id", translate("Mesh Network SSID"), translate('<p style="text-align: justify; padding: 0;"><strong>Ensure that the SSID is the same across all the servers/nodes in your mesh network.</strong></p>'))
 o.default = "easymesh_AC"
 
-encryption = s:taboption("setup", Flag, "encryption", translate("Enable Password"), translate(""))
+encryption = s:taboption("setup", Flag, "encryption", translate("Password Protection"), translate('<p style="text-align: justify; padding: 0;"><strong>Enable this switch to require a password to join your Mesh Network.</strong></p>'))
 encryption.default = 0
 
 o = s:taboption("setup", Value, "key", translate("Mesh Password"))
 o.default = "easymesh"
 o:depends("encryption", 1)
 o.password = true
+o.datatype = "minlength(8)"
 
-enable_kvr = s:taboption("advanced", Flag, "kvr", translate("K/V/R"), translate("Enable Key Value Roaming"))
+btnReapply = s:taboption("setup", Button, "_btn_reapply", translate("Reapply EasyMesh Settings"), translate('<p style="text-align: justify; padding: 0;"><strong>Use this button to apply/reapply EasyMesh configuration after you Save & Apply.</p></strong>'))
+function btnReapply.write()
+    io.popen("/easymesh/easymesh.sh &")
+end
+
+enable_kvr = s:taboption("advanced", Flag, "kvr", translate("K/V/R"), translate('<p style="text-align: justify; padding: 0;"><strong>Leave these settings as default unless you know what you\'re doing</p></strong>'))
 enable_kvr.default = 1
 
-mobility_domain = s:taboption("advanced", Value, "mobility_domain", translate("Mobility Domain"), translate("4-character hexadecimal ID"))
+mobility_domain = s:taboption("advanced", Value, "mobility_domain", translate("Mobility Domain"))
 mobility_domain.default = "4f57"
---mobility_domain.datatype = "and(hexstring,rangelength(4,4))"
-
+mobility_domain.datatype = "and(hexstring,rangelength(4,4))"
 
-rssi_val = s:taboption("advanced", Value, "rssi_val", translate("Threshold for a good RSSI"))
+rssi_val = s:taboption("advanced", Value, "rssi_val", translate("Good RSSI Threshold"))
 rssi_val.default = "-60"
---rssi_val.datatype = "range(-1,-120)"
+rssi_val.datatype = "range(-120,-1)"
 
-
-low_rssi_val = s:taboption("advanced", Value, "low_rssi_val", translate("Threshold for a bad RSSI"))
+low_rssi_val = s:taboption("advanced", Value, "low_rssi_val", translate("Bad RSSI Threshold"))
 low_rssi_val.default = "-88"
---low_rssi_val.datatype = "range(-1,-120)"
-
-
-
----- Apply MESH settings
---ctrl = m:section(TypedSection, "easymesh", "Apply Mesh WiFi Settings to Server or Node")
---ctrl.anonymous = true
---ctrl.addremove = false
-
-----btnStop = ctrl:option(Button, "_btn_start", translate("Apply Mesh WiFi Settings"))
---function btnStop.write()
---    io.popen("/etc/init.d/easymesh start")
---end
-
----- 802.11F
---enable = s:option(Flag, "iapp", translate("inter-access point protocol"), translate("Wireless Access Points (APs) running on different vendors can communicate with each other"))
---enable.default = 0
---enable.rmempty = false
-
--- NodeMode
--- s = m:section(TypedSection, "easymesh", translate("Enable Router as DHCP Mesh Node"), translate("Set up Easy Mesh WiFi on your server and nodes first. All mesh nodes will utilize your mesh server for DHCP. "))
--- s.anonymous = true
+low_rssi_val.datatype = "range(-120,-1)"
 
 ---- ap_mode
 o = s:taboption("apmode", Value, "hostname", translate("Node Hostname"))
@@ -186,7 +132,7 @@ o:value("node7", "node7")
 o:value("node8", "node8")
 o:value("node9", "node9")
 o.datatype = "string"
-o:depends("role", "off")
+o:depends({role="off",role="client"})
 
 -- IP Mode (DHCP or Static)
 ipmode = s:taboption("apmode", ListValue, "ipmode", translate("IP Mode"), translate("Choose if the node uses DHCP or a Static IP"))
@@ -225,13 +171,4 @@ function btnAPMode.write()
 end
 btnAPMode:depends("role", "off")
 
-m.on_before_apply = function(self)
-    local enabled = m:formvalue("cbid.easymesh.config.enabled")
-    if enabled and enabled == "1" then
-        luci.sys.call("/easymesh/easymesh.sh enable &")
-    else
-        luci.sys.call("/easymesh/easymesh.sh disable &")
-    end
-end
-
 return m
\ No newline at end of file
diff --git a/root/easymesh/easymesh.sh b/root/easymesh/easymesh.sh
index fc2baa9..14b4234 100755
--- a/root/easymesh/easymesh.sh
+++ b/root/easymesh/easymesh.sh
@@ -23,7 +23,7 @@ set_apmode() {
         fi
     done
 
-    if [ $(uci -q get easymesh.config.ipmode) == "static" ]; then
+    if [ "$(uci -q get easymesh.config.ipmode)" == "static" ]; then
         # Set static IP
         uci set network.lan.proto='static'
         uci set network.lan.ipaddr=$(uci -q get easymesh.config.ipaddr)
@@ -492,19 +492,18 @@ disable_easymesh() {
     uci del easymesh.config.running
 }
 
-if [ "$1" = "enable" ]; then
-    enable_easymesh
-    exit 0
-elif [ "$1" = "disable" ]; then
-    disable_easymesh
-    exit 0
-elif [ "$1" = "dumbap" ]; then
+if [ "$1" = "dumbap" ]; then
     set_apmode
     exit 0
 elif [ "$1" = "undumb" ]; then
     disable_apmode
     exit 0
+# If no params passed, we disable or enable easymesh based on config
 else
-    echo "Invalid argument. Please use 'start', 'stop' or 'dumbap'"
-    exit 1
+    # Check if easymesh is enabled
+    if [ "$(uci -q get easymesh.config.enabled)" = 1 ]; then
+        enable_easymesh
+    else
+        disable_easymesh
+    fi
 fi