Update 'root/etc/init.d/easymesh'

root/etc/init.d/easymesh

@@ -267,19 +267,18 @@ set_easymesh() {
 
 
 if [ "$ap_mode" = 1 ]; then
-    # Backup Configurations
-    cp /etc/config/wireless /etc/config/wireless.backup
-    cp /etc/config/network /etc/config/network.backup
-    cp /etc/config/dhcp /etc/config/dhcp.backup
+# Backup Configurations if your scared
+cp /etc/config/wireless /etc/config/wireless.backup
+cp /etc/config/network /etc/config/network.backup
+cp /etc/config/dhcp /etc/config/dhcp.backup
 
+# Generate a random IP in the same subnet for fun
+ip_base=$(echo "$dns" | cut -d'.' -f1-3)  # Get the first three octets of the DNS IP
+last_octet=$((RANDOM % 254 + 1))  # Generate a random value for the last octet between 1 and 254
+nodeip="${ip_base}.${last_octet}"  # Concatenate the base IP with the new last octet
 
-    # Generate a random IP in the same subnet
-    ip_base=$(echo "$dns" | cut -d'.' -f1-3)  # Get the first three octets of the DNS IP
-    last_octet=$((RANDOM % 254 + 1))  # Generate a random value for the last octet between 1 and 254
-    nodeip="${ip_base}.${last_octet}"  # Concatenate the base IP with the new last octet
-
-    # random static IP just in case
-    #uci set network.lan.ipaddr=$nodeip  # Set the randomly chosen IP
+# random static IP just in case
+#uci set network.lan.ipaddr=$nodeip  # Set the randomly chosen IP
 
 # Do not need these running
 for i in firewall dnsmasq odhcpd; do
@@ -289,31 +288,40 @@ for i in firewall dnsmasq odhcpd; do
   fi
 done
 
-# Now switch to DHCP client
-
+# Set LAN interface to DHCP client
 uci set network.lan.proto='dhcp'
 uci delete network.wan
 uci delete network.wan6
 uci delete network.lan.ipaddr
 uci delete network.lan.netmask
 
-#break some stuff
-uci set network.lan.netmask=$netmask  # Set your desired netmask
-uci set network.lan.gateway=$dns # Set the gateway IP (usually your main router IP)
-#uci set network.lan.dns=$dns  # Set the DNS IP
+# Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
+uci set network.lan.netmask=$netmask
+uci set network.lan.gateway=$dns
 uci set system.@system[0].hostname=$gateway
 
+# Configure LAN bridge and add ethernet interfaces to the bridge
+uci set network.lan.ifname='eth0 eth1 wan lan1 lan2 lan3' # Add ethernet interfaces and the kitchen sink here
+uci set network.lan.type='bridge'
 
- # commit all changes
+# If you also need to configure the wireless network to be part of the bridge:
+uci set wireless.default_$apall.network='lan' # Make sure the Wi-Fi is part of the lan network
 
-uci commit
+# Commit all changes
+uci commit network
 
-# remove the firewall config
-
-mv /etc/config/firewall /etc/config/firewall.unused
+# In case of separate wireless config, commit that too
+uci commit wireless
 
+# Restart the network to apply changes
 /etc/init.d/network restart
 
+# restart wifi
+wifi reload
+
+# Removing firewall configuration 
+mv /etc/config/firewall /etc/config/firewall.unused
+
 fi