Update 'README.md'

README.md

@@ -0,0 +1,41 @@
+# PrivateRouter's OpenWRT Build for Linksys 7350
+
+This repository provides a build script and accompanying files to facilitate the compilation and installation of OpenWRT for the **Linksys Router Model E7350**. 
+
+## ⚙️ Installation Instructions
+
+The Linksys E7350 router is a dual-boot partition model, which means it retains the ability to boot from one of two partitions. This allows for safer firmware updates and system recovery. 
+
+1. **Factory Image**:
+    - Start with the factory image. You can obtain this from the release section or compile it using the provided build script.
+    - Navigate to the Linksys Advanced Config menu in the router's original firmware.
+    - Use the option to update or flash the firmware and select the factory image file you've obtained.
+    - Once flashed, the router will reboot.
+
+2. **OpenWRT Boot**:
+    - Upon rebooting, the router should now boot into OpenWRT.
+    - Navigate to the OpenWRT interface. By default, this is often at `http://192.168.1.1/`.
+
+3. **Sysupgrade Image**:
+    - In the OpenWRT interface, go to the System Upgrade section.
+    - Upload the sysupgrade image and proceed with the upgrade.
+    - The router will reboot once more after the upgrade.
+
+🔔 **Reminder**: Always ensure you're using the correct image for your specific model and version of the router. Incorrectly flashing can lead to a bricked device.
+
+## 📝 Notes
+
+- Ensure you backup any essential configuration before performing system upgrades.
+- While the dual-boot partition provides a safety net, always be cautious during firmware updates.
+- If you face any challenges, revert to the other partition or seek assistance from community forums.
+
+## 🔗 Resources
+
+For additional details, builds, and updates, please visit the main repository at: 
+[https://gittylab.com/ben/openwrt-linksys-7350](https://gittylab.com/ben/openwrt-linksys-7350)
+
+## 🤝 Contributing
+
+Encountered any issues or have suggestions? Head over to the main repository's issues section and please contribute. All inputs are welcomed.
+
+**⚠️ Disclaimer**: The authors and contributors are not responsible for any damage, data loss, or other issues that might occur by using this firmware or following these instructions. Always proceed with caution.