First commit with new code!
Jason Hawks
1 year ago
parent
6d5d6cf3a2
commit
7589d7c5a0
@ -1,383 +1,452 @@
|
|||||||
#!/bin/bash
|
#!/bin/bash
|
||||||
|
|
||||||
load_easymesh_config() {
|
clear_old_networks() {
|
||||||
enable=$(uci -q get easymesh.config.enabled)
|
# Get the mesh name from UCI config
|
||||||
mesh_bat0=$(uci -q get network.bat0)
|
MESH_NAME=$(uci -q get easymesh.config.mesh_id)
|
||||||
ap_mode=$(uci -q get easymesh.config.ap_mode)
|
|
||||||
lan=$(uci -q get network.lan.ifname)
|
# Get all the radios and go through them one by one to remove old networks and interfaces with the same mesh name
|
||||||
ipaddr=$(uci -q get easymesh.config.ipaddr)
|
for CURRENT_RADIO in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
|
||||||
netmask=$(uci -q get easymesh.config.netmask)
|
echo "Clearing old networks for radio: $CURRENT_RADIO"
|
||||||
gateway=$(uci -q get easymesh.config.gateway)
|
|
||||||
dns=$(uci -q get easymesh.config.dns)
|
# Use awk to parse the 'uci show wireless' output and find the matching section
|
||||||
ap_ipaddr=$(uci -q get network.lan.ipaddr)
|
matched_section=$(uci show wireless | awk -F. -v radio="$CURRENT_RADIO" -v ssid="$MESH_NAME" '
|
||||||
#ap_ipaddr1=$(sed -n '1p' /etc/easymesh 2>/dev/null)
|
$0 ~ /^wireless\.wifinet[0-9]+\.device=/ && $3 ~ radio { device_section=$2 }
|
||||||
apRadio=$(uci -q get easymesh.config.apRadio)
|
$0 ~ /^wireless\.wifinet[0-9]+\.ssid=/ && $3 ~ ssid && device_section == $2 { print $2; exit }
|
||||||
kvr=$(uci -q get easymesh.config.kvr)
|
')
|
||||||
iapp=$(uci -q get easymesh.config.iapp)
|
|
||||||
brlan=$(uci -q get network.@device[0].name)
|
# Check if a matching section was found
|
||||||
role=$(uci -q get easymesh.config.role)
|
if [ -n "$matched_section" ]; then
|
||||||
backbone=$(uci get easymesh.@easymesh[0].backbone)
|
echo "The matching wireless interface section is: $matched_section - deleting it"
|
||||||
apname=$(uci get easymesh.@easymesh[0].apname)
|
uci delete wireless.$matched_section
|
||||||
appass=$(uci get easymesh.@easymesh[0].appass)
|
fi
|
||||||
# On a single line, print all of the variables to a file
|
|
||||||
printf "enable: $enable\nmesh_bat0: $mesh_bat0\nap_mode: $ap_mode\nlan: $lan\nipaddr: $ipaddr\nnetmask: $netmask\ngateway: $gateway\ndns: $dns\nap_ipaddr: $ap_ipaddr\nap_ipaddr1: $ap_ipaddr1\napRadio: $apRadio\nkvr: $kvr\niapp: $iapp\nbrlan: $brlan\nrole: $role\nbackbone: $backbone\napname: $apname\nappass: $appass" > /root/.easymesh
|
|
||||||
}
|
|
||||||
|
|
||||||
stop_node() {
|
# Find and delete existing mesh network interfaces with the specified MESH_NAME on the current radio
|
||||||
cp /etc/config/wireless.meshbak /etc/config/wireless
|
EXISTING_MESH=$(uci show wireless | grep -w "mesh_id='$MESH_NAME'" | grep ".$CURRENT_RADIO." | cut -d'.' -f1-2)
|
||||||
cp /etc/config/network.meshbak /etc/config/network
|
for section in $EXISTING_MESH; do
|
||||||
cp /etc/config/dhcp.meshbak /etc/config/dhcp
|
uci delete $section
|
||||||
|
echo "The matching wireless interface section is: $section - deleting it"
|
||||||
|
done
|
||||||
|
|
||||||
/etc/init.d/network restart
|
# Commit changes to wireless
|
||||||
/etc/init.d/system reload
|
uci commit
|
||||||
|
done
|
||||||
}
|
}
|
||||||
|
|
||||||
# ap_mode_stop() {
|
create_bat0() {
|
||||||
# ap_ipaddr=$(uci -q get network.lan.ipaddr)
|
# Check if bat0 already exists
|
||||||
# ap_ipaddr1=$(sed -n '1p' /etc/easymesh 2>/dev/null)
|
if uci -q get network.bat0 >/dev/null; then
|
||||||
# dns1=$(sed -n '2p' /etc/easymesh 2>/dev/null)
|
echo "bat0 interface already exists."
|
||||||
# if [ "$ap_ipaddr" = "$ap_ipaddr1" ]; then
|
else
|
||||||
# uci -q delete network.lan.gateway
|
uci set network.bat0=interface
|
||||||
# uci -q del_list network.lan.dns=$dns1
|
uci set network.bat0.proto='batadv'
|
||||||
# uci commit network
|
uci set network.bat0.routing_algo='BATMAN_IV'
|
||||||
|
uci set network.bat0.aggregated_ogms='1'
|
||||||
|
uci set network.bat0.ap_isolation='0'
|
||||||
|
uci set network.bat0.bonding='1'
|
||||||
|
uci set network.bat0.bridge_loop_avoidance='1'
|
||||||
|
uci set network.bat0.distributed_arp_table='1'
|
||||||
|
uci set network.bat0.fragmentation='1'
|
||||||
|
uci set network.bat0.hop_penalty='30'
|
||||||
|
uci set network.bat0.isolation_mark='0x00000000/0x00000000'
|
||||||
|
uci set network.bat0.log_level='0'
|
||||||
|
uci set network.bat0.multicast_fanout='16'
|
||||||
|
uci set network.bat0.multicast_mode='1'
|
||||||
|
uci set network.bat0.network_coding='0'
|
||||||
|
uci set network.bat0.orig_interval='1000'
|
||||||
|
echo "bat0 interface has been created."
|
||||||
|
|
||||||
|
# Set the bat0 role
|
||||||
|
BAT_ROLE=$(uci -q get easymesh.config.role)
|
||||||
|
if [ "${BAT_ROLE}" == "server" ]; then
|
||||||
|
uci set network.bat0.gw_mode='server'
|
||||||
|
elif [ "${BAT_ROLE}" == "client" ]; then
|
||||||
|
uci set network.bat0.gw_mode='client'
|
||||||
|
else
|
||||||
|
uci set network.bat0.gw_mode='off'
|
||||||
|
fi
|
||||||
|
|
||||||
# echo "" >/etc/easymesh
|
# Get the current list of ports for the 'br-lan' interface
|
||||||
|
LAN_PORTS=$(uci -q get network.@device[0].ports)
|
||||||
|
# Check if 'bat0' is already in the list of ports for 'br-lan'
|
||||||
|
if echo "$LAN_PORTS" | grep -q 'bat0'; then
|
||||||
|
uci del_list network.@device[0].ports='bat0'
|
||||||
|
echo "Old bat0 interface deleted from lan network."
|
||||||
|
fi
|
||||||
|
|
||||||
# uci -q delete dhcp.lan.dynamicdhcp
|
# Add 'bat0' to the list of ports for 'br-lan'
|
||||||
# uci -q delete dhcp.lan.ignore
|
uci add_list network.@device[0].ports='bat0'
|
||||||
# uci commit dhcp
|
echo "bat0 has been added to the lan network."
|
||||||
|
|
||||||
# /etc/init.d/odhcpd enable && /etc/init.d/odhcpd start
|
|
||||||
# /etc/init.d/firewall enable && /etc/init.d/firewall start >/dev/null 2>&1
|
|
||||||
# fi
|
|
||||||
# }
|
|
||||||
|
|
||||||
add_wifi_mesh() {
|
|
||||||
mesh_nwi_mesh=$(uci -q get network.nwi_mesh_${apall})
|
|
||||||
mesh_apRadio=$(uci -q get wireless.mesh_${apall}.device)
|
|
||||||
mesh_mesh=$(uci -q get wireless.mesh_${apall})
|
|
||||||
mesh_id=$(uci -q get easymesh.config.mesh_id)
|
|
||||||
mobility_domain=$(uci -q get easymesh.config.mobility_domain)
|
|
||||||
key=$(uci -q get easymesh.config.key)
|
|
||||||
encryption=$(uci -q get easymesh.config.encryption)
|
|
||||||
# Print out all the variables
|
|
||||||
printf "mesh_nwi_mesh: $mesh_nwi_mesh\nmesh_apRadio: $mesh_apRadio\nmesh_mesh: $mesh_mesh\nmesh_id: $mesh_id\nmobility_domain: $mobility_domain\nkey: $key\nencryption: $encryption" > /root/.newmesh
|
|
||||||
|
|
||||||
|
|
||||||
if [ "$mesh_nwi_mesh" != "interface" ]; then
|
|
||||||
uci set network.nwi_mesh_$apall=interface
|
|
||||||
uci set network.nwi_mesh_$apall.proto='batadv_hardif'
|
|
||||||
uci set network.nwi_mesh_$apall.master='bat0'
|
|
||||||
uci set network.nwi_mesh_$apall.mtu='1536'
|
|
||||||
# adding batman to the 'lan' zone in fw
|
|
||||||
uci del_list firewall.lan.network="bat0"
|
|
||||||
uci add_list firewall.lan.network='bat0'
|
|
||||||
uci del_list firewall.lan.network="nwi_mesh_$apall"
|
|
||||||
uci add_list firewall.lan.network="nwi_mesh_$apall"
|
|
||||||
uci commit network
|
uci commit network
|
||||||
uci commit firewall
|
|
||||||
/etc/init.d/firewall restart
|
|
||||||
fi
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
if [ "$mesh_mesh" != "wifi-iface" ]; then
|
find_radios() {
|
||||||
uci set wireless.mesh_$apall=wifi-iface
|
# Get the radio to be used for mesh from the config
|
||||||
uci set wireless.mesh_$apall.device=$apall
|
AP_RADIO=$(uci -q get easymesh.config.apRadio)
|
||||||
uci set wireless.mesh_$apall.ifname=mesh_${apall}
|
|
||||||
uci set wireless.mesh_$apall.network=nwi_mesh_${apall}
|
|
||||||
uci set wireless.mesh_$apall.mode='mesh'
|
|
||||||
uci set wireless.mesh_$apall.mesh_id=$mesh_id
|
|
||||||
uci set wireless.mesh_$apall.mesh_fwding='1'
|
|
||||||
uci set wireless.mesh_$apall.mesh_ttl='1'
|
|
||||||
uci set wireless.mesh_$apall.mcast_rate='24000'
|
|
||||||
uci set wireless.mesh_$apall.disabled='0'
|
|
||||||
uci commit wireless
|
|
||||||
fi
|
|
||||||
|
|
||||||
if [ "$mesh_mesh" = "wifi-iface" ]; then
|
# Check if AP_RADIO is empty, if so exit
|
||||||
if [ "$mesh_apRadio" != "$apall" ]; then
|
if [ -z "$AP_RADIO" ]; then
|
||||||
uci set wireless.mesh_$apall.device=$apall
|
echo "No radio specified in the config, exiting."
|
||||||
uci commit wireless
|
exit 1
|
||||||
fi
|
|
||||||
fi
|
fi
|
||||||
|
|
||||||
if [ "$encryption" != 1 ]; then
|
# Check to make sure if "all" is passed or a single radio
|
||||||
apnum="${mesh_apRadio#radio}"
|
if [ "$AP_RADIO" == "all" ]; then
|
||||||
apnum=$((apnum + 1))
|
# Get the list of wifi devices
|
||||||
found=0
|
WIFI_RADIOS=$(uci -X show wireless | awk -F'[.=]' '/wifi-device/ {print $2}' | tr '\n' ' ')
|
||||||
|
|
||||||
# Check all existing wifinetX and remove if SSID matches with $mesh_id and mode is 'ap'
|
|
||||||
while uci get wireless.wifinet$apnum > /dev/null 2>&1; do
|
|
||||||
existing_ssid=$(uci get wireless.wifinet$apnum.ssid 2> /dev/null)
|
|
||||||
existing_mode=$(uci get wireless.wifinet$apnum.mode 2> /dev/null)
|
|
||||||
if [ "$existing_ssid" = "$mesh_id" ] && [ "$existing_mode" = "ap" ]; then
|
|
||||||
if [ $found -eq 0 ]; then
|
|
||||||
found=1
|
|
||||||
else
|
else
|
||||||
uci delete wireless.wifinet$apnum
|
# Set the radio to the one passed in the config
|
||||||
|
WIFI_RADIOS=$AP_RADIO
|
||||||
fi
|
fi
|
||||||
fi
|
}
|
||||||
apnum=$((apnum + 1))
|
|
||||||
|
process_radios() {
|
||||||
|
# Check if WIFI_RADIOS contains more than one radio
|
||||||
|
if [[ $WIFI_RADIOS =~ [[:space:]] ]]; then
|
||||||
|
# Loop through all the radios and set them up
|
||||||
|
for radio in $WIFI_RADIOS; do
|
||||||
|
echo "Multiple Radio Setup, Current Radio: $radio"
|
||||||
|
setup_mesh_radio $radio
|
||||||
done
|
done
|
||||||
|
else
|
||||||
|
echo "Calling Single Radio Setup: $WIFI_RADIOS"
|
||||||
|
setup_mesh_radio $WIFI_RADIOS
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
# This is called from the process_radios function and is passed the radio to be used for mesh
|
||||||
|
setup_mesh_radio() {
|
||||||
|
CURRENT_RADIO=$1
|
||||||
|
echo "Setting up radio: $CURRENT_RADIO"
|
||||||
|
|
||||||
|
# Get the mesh name from UCI config
|
||||||
|
MESH_NAME=$(uci -q get easymesh.config.mesh_id)
|
||||||
|
|
||||||
|
# Commit changes to wireless
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
|
|
||||||
if [ $found -eq 0 ]; then
|
uci set network.nwi_mesh_$CURRENT_RADIO=interface
|
||||||
uci set wireless.mesh_$apall.encryption='none'
|
uci set network.nwi_mesh_$CURRENT_RADIO.proto='batadv_hardif'
|
||||||
# uci set wireless.mesh_$apall.disabled='0'
|
uci set network.nwi_mesh_$CURRENT_RADIO.master='bat0'
|
||||||
uci set wireless.wifinet$apnum=wifi-iface
|
uci set network.nwi_mesh_$CURRENT_RADIO.device='bat0'
|
||||||
uci set wireless.wifinet$apnum.device=$mesh_apRadio
|
uci set network.nwi_mesh_$CURRENT_RADIO.mtu='1536'
|
||||||
uci set wireless.wifinet$apnum.mode='ap'
|
|
||||||
uci set wireless.wifinet$apnum.ssid=$mesh_id
|
uci set wireless.mesh_$CURRENT_RADIO=wifi-iface
|
||||||
uci set wireless.wifinet$apnum.encryption='none'
|
uci set wireless.mesh_$CURRENT_RADIO.device=$CURRENT_RADIO
|
||||||
uci set wireless.wifinet$apnum.key=$key
|
uci set wireless.mesh_$CURRENT_RADIO.ifname=mesh_$CURRENT_RADIO
|
||||||
uci set wireless.wifinet$apnum.ieee80211r='1'
|
uci set wireless.mesh_$CURRENT_RADIO.network=nwi_mesh_$CURRENT_RADIO
|
||||||
uci set wireless.wifinet$apnum.mobility_domain=$mobility_domain
|
uci set wireless.mesh_$CURRENT_RADIO.mode='mesh'
|
||||||
uci set wireless.wifinet$apnum.ft_over_ds='0'
|
uci set wireless.mesh_$CURRENT_RADIO.mesh_id=$MESH_NAME
|
||||||
uci set wireless.wifinet$apnum.ft_psk_generate_local='1'
|
uci set wireless.mesh_$CURRENT_RADIO.mesh_fwding='0'
|
||||||
uci set wireless.wifinet$apnum.network='lan'
|
uci set wireless.mesh_$CURRENT_RADIO.mesh_rssi_threshold='0'
|
||||||
uci set wireless.wifinet$apnum.disabled=0
|
uci set wireless.mesh_$CURRENT_RADIO.mesh_ttl='1'
|
||||||
|
uci set wireless.mesh_$CURRENT_RADIO.mcast_rate='24000'
|
||||||
|
uci set wireless.mesh_$CURRENT_RADIO.disabled='0'
|
||||||
|
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
|
|
||||||
|
# Extact the radio number from the radio name
|
||||||
|
RADIO_NUM="${CURRENT_RADIO#radio}"
|
||||||
|
|
||||||
|
# Get the mobility domain from the config
|
||||||
|
MOBILITY_DOMAIN=$(uci -q get easymesh.config.mobility_domain)
|
||||||
|
|
||||||
|
# If mobility domain is empty, set it to a random 4 digit hex number, then set it in the config
|
||||||
|
if [ -z "$MOBILITY_DOMAIN" ]; then
|
||||||
|
MOBILITY_DOMAIN=$(hexdump -n 2 -e '2/1 "%02x"' /dev/urandom)
|
||||||
|
uci set easymesh.config.mobility_domain=$MOBILITY_DOMAIN
|
||||||
|
uci commit easymesh
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
# Get the encryption enabled from the config
|
||||||
|
ENCRYPTION_ENABLED=$(uci -q get easymesh.config.encryption)
|
||||||
|
|
||||||
|
# Setup the interface for the mesh network
|
||||||
|
uci set wireless.mesh_$CURRENT_RADIO.disabled='0'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM=wifi-iface
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.device=$CURRENT_RADIO
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.mode='ap'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.ssid=$MESH_NAME
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.mobility_domain=$MOBILITY_DOMAIN
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.ft_over_ds='0'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='0'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.network='lan'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.disabled=0
|
||||||
|
|
||||||
|
# Get the encryption key from the config
|
||||||
|
NETWORK_KEY=$(uci -q get easymesh.config.key)
|
||||||
|
|
||||||
|
# Check if encryption is enabled and if the key is not empty
|
||||||
|
if [ "$ENCRYPTION_ENABLED" = 1 ] && [ ! -z $NETWORK_KEY ]; then
|
||||||
|
uci set wireless.mesh_$CURRENT_RADIO.encryption='sae'
|
||||||
|
uci set wireless.mesh_$CURRENT_RADIO.key=$NETWORK_KEY
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.encryption='sae-mixed'
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.key=$NETWORK_KEY
|
||||||
else
|
else
|
||||||
apnum="${mesh_apRadio#radio}"
|
uci set wireless.mesh_$CURRENT_RADIO.encryption='none'
|
||||||
apnum=$((apnum + 1))
|
uci set wireless.wifinet$RADIO_NUM.encryption='none'
|
||||||
found=0
|
[ -z $NETWORK_KEY ] && echo "Encryption key is empty, so encryption was disabled."
|
||||||
|
|
||||||
# Check all existing wifinetX and remove if SSID matches with $mesh_id and mode is 'ap'
|
|
||||||
while uci get wireless.wifinet$apnum > /dev/null 2>&1; do
|
|
||||||
existing_ssid=$(uci get wireless.wifinet$apnum.ssid 2> /dev/null)
|
|
||||||
existing_mode=$(uci get wireless.wifinet$apnum.mode 2> /dev/null)
|
|
||||||
if [ "$existing_ssid" = "$mesh_id" ] && [ "$existing_mode" = "ap" ]; then
|
|
||||||
if [ $found -eq 0 ]; then
|
|
||||||
found=1
|
|
||||||
else
|
|
||||||
uci delete wireless.wifinet$apnum
|
|
||||||
fi
|
fi
|
||||||
fi
|
|
||||||
apnum=$((apnum + 1))
|
|
||||||
done
|
|
||||||
uci commit wireless
|
|
||||||
|
|
||||||
if [ $found -eq 0 ]; then
|
# Commit our block of changes to wireless
|
||||||
uci set wireless.mesh_$apall.encryption='sae'
|
|
||||||
# uci set wireless.mesh_$apall.disabled='0'
|
|
||||||
uci set wireless.mesh_$apall.key=$key
|
|
||||||
uci set wireless.wifinet$apnum=wifi-iface
|
|
||||||
uci set wireless.wifinet$apnum.device=$apall
|
|
||||||
uci set wireless.wifinet$apnum.mode='ap'
|
|
||||||
uci set wireless.wifinet$apnum.ssid=$mesh_id
|
|
||||||
uci set wireless.wifinet$apnum.encryption='sae-mixed'
|
|
||||||
uci set wireless.wifinet$apnum.key=$key
|
|
||||||
uci set wireless.wifinet$apnum.ieee80211r='1'
|
|
||||||
uci set wireless.wifinet$apnum.mobility_domain=$mobility_domain
|
|
||||||
uci set wireless.wifinet$apnum.ft_over_ds='0'
|
|
||||||
uci set wireless.wifinet$apnum.ft_psk_generate_local='1'
|
|
||||||
uci set wireless.wifinet$apnum.network='lan'
|
|
||||||
uci set wireless.wifinet$apnum.disabled=0
|
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
fi
|
|
||||||
fi
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
add_kvr() {
|
# Check if we need to setup kvr
|
||||||
kvr=$(uci -q get easymesh.config.kvr)
|
ENABLE_KVR=$(uci -q get easymesh.config.kvr)
|
||||||
mobility_domain=$(uci -q get easymesh.config.mobility_domain)
|
|
||||||
iapp=$(uci -q get easymesh.config.iapp)
|
if [ "$ENABLE_KVR" = 1 ]; then
|
||||||
for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
|
uci set wireless.wifinet$RADIO_NUM.ieee80211k='1'
|
||||||
if [ "$kvr" = 1 ]; then
|
uci set wireless.wifinet$RADIO_NUM.rrm_neighbor_report='1'
|
||||||
uci set wireless.default_$apall.ieee80211k='1'
|
uci set wireless.wifinet$RADIO_NUM.rrm_beacon_report='1'
|
||||||
uci set wireless.default_$apall.rrm_neighbor_report='1'
|
uci set wireless.wifinet$RADIO_NUM.ieee80211v='1'
|
||||||
uci set wireless.default_$apall.rrm_beacon_report='1'
|
uci set wireless.wifinet$RADIO_NUM.bss_transition='1'
|
||||||
uci set wireless.default_$apall.ieee80211v='1'
|
uci set wireless.wifinet$RADIO_NUM.ieee80211r='1'
|
||||||
uci set wireless.default_$apall.bss_transition='1'
|
uci set wireless.wifinet$RADIO_NUM.ft_over_ds='1'
|
||||||
uci set wireless.default_$apall.ieee80211r='1'
|
uci set wireless.wifinet$RADIO_NUM.ft_psk_generate_local='1'
|
||||||
uci set wireless.default_$apall.encryption='sae'
|
|
||||||
uci set wireless.default_$apall.mobility_domain=$mobility_domain
|
|
||||||
uci set wireless.default_$apall.ft_over_ds='1'
|
|
||||||
uci set wireless.default_$apall.ft_psk_generate_local='1'
|
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
else
|
else
|
||||||
uci -q delete wireless.default_$apall.ieee80211k
|
uci -q delete wireless.wifinet$RADIO_NUM.ieee80211k
|
||||||
uci -q delete wireless.default_$apall.ieee80211v
|
uci -q delete wireless.wifinet$RADIO_NUM.ieee80211v
|
||||||
uci -q delete wireless.default_$apall.ieee80211r
|
uci -q delete wireless.wifinet$RADIO_NUM.ieee80211r
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
fi
|
fi
|
||||||
if [ "$iapp" = 1 ]; then
|
|
||||||
uci set wireless.default_$apall.iapp_interface='br-lan'
|
# Check if we need to setup iapp
|
||||||
|
ENABLE_IAPP=$(uci -q get easymesh.config.iapp)
|
||||||
|
|
||||||
|
if [ "$ENABLE_IAPP" = 1 ]; then
|
||||||
|
# Get the LAN interface name
|
||||||
|
LAN_NAME=$(uci -q get network.@device[0].name)
|
||||||
|
# If LAN_NAME is not empty, set the iapp interface
|
||||||
|
if [ ! -z "$LAN_NAME" ]; then
|
||||||
|
uci set wireless.wifinet$RADIO_NUM.iapp_interface="$LAN_NAME"
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
|
fi
|
||||||
else
|
else
|
||||||
uci -q delete wireless.default_$apall.iapp_interface
|
uci -q delete wireless.wifinet$RADIO_NUM.iapp_interface
|
||||||
uci commit wireless
|
uci commit wireless
|
||||||
fi
|
fi
|
||||||
done
|
|
||||||
}
|
|
||||||
|
|
||||||
add_dawn() {
|
|
||||||
kvr=$(uci -q get easymesh.config.kvr)
|
|
||||||
rssi_val=$(uci -q get easymesh.config.rssi_val)
|
|
||||||
low_rssi_val=$(uci -q get easymesh.config.low_rssi_val)
|
|
||||||
|
|
||||||
if [ "$kvr" = 1 ]; then
|
# If KVR is enabled, setup DAWN
|
||||||
uci set dawn.@metric[0].rssi_val=$rssi_val
|
if [ "$ENABLE_KVR" = 1 ]; then
|
||||||
uci set dawn.@metric[0].low_rssi_val=$low_rssi_val
|
RSSI=$(uci -q get easymesh.config.rssi_val)
|
||||||
|
LOW_RSSI=$(uci -q get easymesh.config.low_rssi_val)
|
||||||
|
uci set dawn.@metric[0].rssi_val=$RSSI
|
||||||
|
uci set dawn.@metric[0].low_rssi_val=$LOW_RSSI
|
||||||
uci commit dawn
|
uci commit dawn
|
||||||
/etc/init.d/dawn enable && /etc/init.d/dawn start
|
/etc/init.d/dawn enable && /etc/init.d/dawn start
|
||||||
else
|
else
|
||||||
/etc/init.d/dawn stop && /etc/init.d/dawn disable
|
/etc/init.d/dawn stop && /etc/init.d/dawn disable
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
# Commit our block of changes to the configs
|
||||||
|
uci commit
|
||||||
}
|
}
|
||||||
|
|
||||||
set_easymesh() {
|
restart_and_reload() {
|
||||||
if [ "$enable" = 1 ]; then
|
# Enable all the radios and commit the changes at once
|
||||||
if [ "$mesh_bat0" != "interface" ]; then
|
for radio in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
|
||||||
uci set network.bat0=interface
|
echo "Enabling $radio..."
|
||||||
uci set network.bat0.proto='batadv'
|
uci set wireless.$radio.disabled=0
|
||||||
uci set network.bat0.routing_algo='BATMAN_IV'
|
done
|
||||||
uci set network.bat0.aggregated_ogms='1'
|
uci commit
|
||||||
uci set network.bat0.ap_isolation='0'
|
echo "All radios enabled."
|
||||||
uci set network.bat0.bonding='1'
|
|
||||||
uci set network.bat0.bridge_loop_avoidance='1'
|
|
||||||
uci set network.bat0.distributed_arp_table='1'
|
|
||||||
uci set network.bat0.fragmentation='1'
|
|
||||||
# uci set network.bat0.gw_bandwidth='10000/2000'
|
|
||||||
# uci set network.bat0.gw_sel_class='20'
|
|
||||||
uci set network.bat0.hop_penalty='30'
|
|
||||||
uci set network.bat0.isolation_mark='0x00000000/0x00000000'
|
|
||||||
uci set network.bat0.log_level='0'
|
|
||||||
uci set network.bat0.multicast_fanout='16'
|
|
||||||
uci set network.bat0.multicast_mode='1'
|
|
||||||
uci set network.bat0.network_coding='0'
|
|
||||||
uci set network.bat0.orig_interval='1000'
|
|
||||||
|
|
||||||
if [ "$role" = "server" ]; then
|
# Apply the wireless configuration changes
|
||||||
uci set network.bat0.gw_mode='server'
|
wifi reload
|
||||||
elif [ "$role" = "client" ]; then
|
echo "Wireless interfaces reloaded."
|
||||||
uci set network.bat0.gw_mode='client'
|
|
||||||
else
|
# Apply network configuration changes
|
||||||
uci set network.bat0.gw_mode='off'
|
# Note: Only use reload_config if you have made changes to the network config
|
||||||
|
# and need to apply them. Otherwise, you can skip this step.
|
||||||
|
reload_config
|
||||||
|
echo "Network configuration reloaded."
|
||||||
|
|
||||||
|
/etc/init.d/network reload
|
||||||
|
/etc/init.d/network restart
|
||||||
|
}
|
||||||
|
|
||||||
|
disable_easymesh() {
|
||||||
|
# Delete the bat0 interface
|
||||||
|
if [ "$(uci -q get network.bat0)" = "interface" ]; then
|
||||||
|
uci del network.bat0
|
||||||
fi
|
fi
|
||||||
|
|
||||||
if [ "$brlan" = "br-lan" ]; then
|
# Get the current list of ports for the 'br-lan' interface
|
||||||
uci add_list network.@device[0].ports='bat0'
|
LAN_PORTS=$(uci -q get network.@device[0].ports)
|
||||||
else
|
# Check if 'bat0' is already in the list of ports for 'br-lan'
|
||||||
uci set network.lan.ifname="${lan} bat0"
|
if echo "$LAN_PORTS" | grep -q 'bat0'; then
|
||||||
|
uci del_list network.@device[0].ports='bat0'
|
||||||
|
echo "Old bat0 interface deleted from lan network."
|
||||||
fi
|
fi
|
||||||
|
|
||||||
|
# Get the list of wifi devices
|
||||||
|
WIFI_RADIOS=$(uci -X show wireless | awk -F'[.=]' '/wifi-device/ {print $2}' | tr '\n' ' ')
|
||||||
|
|
||||||
|
# Loop through all the radios and delete the network interfaces
|
||||||
|
for CURRENT_RADIO in $WIFI_RADIOS; do
|
||||||
|
echo "Handling removal of mesh networks for: $CURRENT_RADIO"
|
||||||
|
if [ "$(uci -q get network.nwi_mesh_$CURRENT_RADIO)" = "interface" ]; then
|
||||||
|
uci del network.nwi_mesh_$CURRENT_RADIO
|
||||||
uci commit network
|
uci commit network
|
||||||
fi # end [ "$mesh_bat0" != "interface" ]
|
|
||||||
|
|
||||||
# When this is called, the add_wifi_mesh function does not load variables properly
|
|
||||||
if [ "$apRadio" = "all" ]; then
|
|
||||||
for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
|
|
||||||
add_wifi_mesh
|
|
||||||
add_kvr
|
|
||||||
add_dawn
|
|
||||||
done
|
|
||||||
else
|
|
||||||
apall=$apRadio
|
|
||||||
add_wifi_mesh
|
|
||||||
add_kvr
|
|
||||||
add_dawn
|
|
||||||
fi
|
fi
|
||||||
|
done
|
||||||
|
|
||||||
|
uci commit
|
||||||
|
|
||||||
if [ "$ap_mode" = 1 ]; then
|
reload_config
|
||||||
# Backup Configurations if your scared
|
echo "Network configuration reloaded."
|
||||||
|
|
||||||
|
/etc/init.d/network reload
|
||||||
|
/etc/init.d/network restart
|
||||||
|
}
|
||||||
|
|
||||||
|
set_apmode() {
|
||||||
|
AP_MODE=$(uci -q get easymesh.config.ap_mode)
|
||||||
|
if [ "$AP_MODE" = 1 ]; then
|
||||||
|
# Set a flag to indicate that we are in AP mode
|
||||||
|
# When we go to disable easymesh, we will check this flag and if it was set we restore settings
|
||||||
|
uci set easymesh.config.ap_mode_enabled=1
|
||||||
|
|
||||||
|
# Backup our configs
|
||||||
|
rm /etc/config/*.meshbak
|
||||||
cp /etc/config/wireless /etc/config/wireless.meshbak
|
cp /etc/config/wireless /etc/config/wireless.meshbak
|
||||||
cp /etc/config/network /etc/config/network.meshbak
|
cp /etc/config/network /etc/config/network.meshbak
|
||||||
cp /etc/config/dhcp /etc/config/dhcp.meshbak
|
cp /etc/config/dhcp /etc/config/dhcp.meshbak
|
||||||
|
|
||||||
# Generate a random IP in the same subnet for fun
|
# Generate a random IP in the same subnet for fun
|
||||||
ip_base=$(echo "$dns" | cut -d'.' -f1-3) # Get the first three octets of the DNS IP
|
# ip_base=$(echo "$dns" | cut -d'.' -f1-3) # Get the first three octets of the DNS IP
|
||||||
last_octet=$((RANDOM % 254 + 1)) # Generate a random value for the last octet between 1 and 254
|
# last_octet=$((RANDOM % 254 + 1)) # Generate a random value for the last octet between 1 and 254
|
||||||
nodeip="${ip_base}.${last_octet}" # Concatenate the base IP with the new last octet
|
# nodeip="${ip_base}.${last_octet}" # Concatenate the base IP with the new last octet
|
||||||
|
|
||||||
# random static IP just in case
|
# Disabling and stopping services not needed
|
||||||
#uci set network.lan.ipaddr=$nodeip # Set the randomly chosen IP
|
for service in firewall dnsmasq odhcpd; do
|
||||||
|
if /etc/init.d/$service enabled; then
|
||||||
# Do not need these running
|
echo "Disabling and stopping $service..."
|
||||||
for i in firewall dnsmasq odhcpd; do
|
/etc/init.d/$service disable
|
||||||
if /etc/init.d/"$i" enabled; then
|
/etc/init.d/$service stop
|
||||||
/etc/init.d/"$i" disable
|
else
|
||||||
/etc/init.d/"$i" stop
|
echo "$service is not enabled, skipping..."
|
||||||
fi
|
fi
|
||||||
done
|
done
|
||||||
|
|
||||||
# Set LAN interface to DHCP client
|
# Set LAN interface to DHCP client
|
||||||
|
uci del network.lan.ipaddr
|
||||||
|
uci del network.lan.netmask
|
||||||
uci set network.lan.proto='dhcp'
|
uci set network.lan.proto='dhcp'
|
||||||
uci delete network.wan
|
uci del network.wan
|
||||||
uci delete network.wan6
|
uci del network.wan6
|
||||||
uci delete network.lan.ipaddr
|
|
||||||
uci delete network.lan.netmask
|
|
||||||
|
|
||||||
# Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
|
# Fix firewall to be disabled
|
||||||
# Comment out because we want to pull this from dhcp
|
uci del firewall.lan.network
|
||||||
# uci set network.lan.netmask=$netmask
|
uci del firewall.wan.network
|
||||||
# uci set network.lan.gateway=$dns
|
|
||||||
uci set system.@system[0].hostname=$gateway
|
|
||||||
|
|
||||||
# Configure LAN bridge and add ethernet interfaces to the bridge
|
|
||||||
uci del network.@device[0].ports
|
|
||||||
uci add_list network.@device[0].ports='bat0'
|
|
||||||
uci add_list network.@device[0].ports='eth0'
|
|
||||||
uci add_list network.@device[0].ports='lan1'
|
|
||||||
uci add_list network.@device[0].ports='lan2'
|
|
||||||
uci add_list network.@device[0].ports='wan'
|
|
||||||
uci set network.lan.type='bridge'
|
|
||||||
|
|
||||||
# Make sure the Wi-Fi is part of the lan
|
|
||||||
uci set wireless.wifinet1.network='lan nwi_mesh_${apall} wwan'
|
|
||||||
|
|
||||||
# Commit all changes
|
|
||||||
uci commit
|
|
||||||
|
|
||||||
# Restart the network to apply changes
|
|
||||||
/etc/init.d/network restart
|
|
||||||
/etc/init.d/system reload
|
|
||||||
|
|
||||||
# restart wifi
|
# Fix dhcp to be disabled
|
||||||
wifi reload
|
uci set dhcp.lan.ignore='1'
|
||||||
wifi up
|
uci del dhcp.wan
|
||||||
|
|
||||||
# Removing firewall configuration
|
# Fix this for proper variable name
|
||||||
mv /etc/config/firewall /etc/config/firewall.unused
|
HOSTNAME=$(uci -q get easymesh.config.gateway)
|
||||||
|
# Set netmask and gateway (assuming $netmask and $dns didn't break more stuff)
|
||||||
|
uci set system.@system[0].hostname=$HOSTNAME
|
||||||
|
|
||||||
else
|
# Retrieve the list of ports for network.@device[0]
|
||||||
stop_node
|
LAN_PORTS=$(uci get network.@device[0].ports)
|
||||||
fi # end if [ "$ap_mode" = 1 ]
|
|
||||||
else
|
|
||||||
# Disable the ap_mode settings
|
|
||||||
stop_node
|
|
||||||
|
|
||||||
if [ "$mesh_bat0" = "interface" ]; then
|
# Check if 'wan' is already in the list of ports
|
||||||
uci -q delete network.bat0
|
if echo "$LAN_PORTS" | grep -q -w 'wan'; then
|
||||||
if [ "$brlan" = "br-lan" ]; then
|
echo "'wan' is already in the list of ports for lan."
|
||||||
uci -q del_list network.@device[0].ports='bat0'
|
|
||||||
else
|
else
|
||||||
sed -i 's/ bat0//' /etc/config/network
|
echo "'wan' is not in the list. Adding it to lan ports..."
|
||||||
fi
|
uci add_list network.@device[0].ports='wan'
|
||||||
uci commit network
|
|
||||||
fi
|
fi
|
||||||
|
|
||||||
for apall in $(uci -X show wireless | grep wifi-device | awk -F'[.=]' '{print $2}'); do
|
# Find all radios we are using in our setup
|
||||||
mesh_nwi_mesh=$(uci -q get network.nwi_mesh_${apall})
|
find_radios
|
||||||
mesh_mesh=$(uci -q get wireless.mesh_${apall})
|
|
||||||
|
#### COME BACK TO THIS ####
|
||||||
|
# # Check if WIFI_RADIOS contains more than one radio
|
||||||
|
# if [[ $WIFI_RADIOS =~ [[:space:]] ]]; then
|
||||||
|
# # Loop through all the radios add nwimesh to the that network
|
||||||
|
# for cur_radio in $WIFI_RADIOS; do
|
||||||
|
# echo "Multiple Radio Setup, Current Radio: $radio"
|
||||||
|
# # Extact the radio number from the radio name
|
||||||
|
# wifi_num="${cur_radio#radio}"
|
||||||
|
# uci set wireless.wifinet${wifi_num}.network="lan nwi_mesh_${cur_radio}"
|
||||||
|
# done
|
||||||
|
# else
|
||||||
|
# echo "Calling Single Radio Setup: $WIFI_RADIOS"
|
||||||
|
# # Extact the radio number from the radio name
|
||||||
|
# wifi_num="${WIFI_RADIOS#radio}"
|
||||||
|
# uci set wireless.wifinet${wifi_num}.network="lan nwi_mesh_${WIFI_RADIOS}"
|
||||||
|
# fi
|
||||||
|
|
||||||
if [ "$mesh_nwi_mesh" = "interface" ]; then
|
uci commit
|
||||||
uci -q delete network.nwi_mesh_$apall
|
# Tell openwrt to reload the configs
|
||||||
uci commit network
|
reload_config
|
||||||
fi
|
else
|
||||||
|
# Set a flag to indicate that we are in AP mode
|
||||||
|
uci set easymesh.config.ap_mode_enabled=0
|
||||||
|
|
||||||
if [ "$mesh_mesh" = "wifi-iface" ]; then
|
# Restore our configs
|
||||||
uci -q delete wireless.mesh_$apall
|
[ -f /etc/config/wireless.meshbak ] && {
|
||||||
uci commit wireless
|
mv /etc/config/wireless /etc/config/wireless.dumbap
|
||||||
|
cp /etc/config/wireless.meshbak /etc/config/wireless
|
||||||
|
}
|
||||||
|
[ -f /etc/config/network.meshbak ] && {
|
||||||
|
mv /etc/config/network /etc/config/network.dumbap
|
||||||
|
cp /etc/config/network.meshbak /etc/config/network
|
||||||
|
}
|
||||||
|
[ -f /etc/config/dhcp.meshbak ] && {
|
||||||
|
mv /etc/config/dhcp /etc/config/dhcp.dumbap
|
||||||
|
cp /etc/config/dhcp.meshbak /etc/config/dhcp
|
||||||
|
}
|
||||||
|
|
||||||
|
# Enable and start services not needed
|
||||||
|
for service in firewall dnsmasq odhcpd; do
|
||||||
|
if /etc/init.d/$service disabled; then
|
||||||
|
echo "Enabling and starting $service..."
|
||||||
|
/etc/init.d/$service enable
|
||||||
|
/etc/init.d/$service start
|
||||||
|
else
|
||||||
|
echo "$service is not disabled, skipping..."
|
||||||
fi
|
fi
|
||||||
done
|
done
|
||||||
|
|
||||||
|
reload_config
|
||||||
|
/etc/init.d/network reload
|
||||||
fi
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
/etc/init.d/network restart
|
# ENABLED=$(uci -q get easymesh.config.enabled)
|
||||||
} # end set_easymesh()
|
# if [ "$ENABLED" = 1 ]; then
|
||||||
|
# clear_old_networks
|
||||||
|
# create_bat0
|
||||||
|
# find_radios
|
||||||
|
# process_radios
|
||||||
|
# restart_and_reload
|
||||||
|
# else
|
||||||
|
# clear_old_networks
|
||||||
|
# disable_easymesh
|
||||||
|
# fi
|
||||||
|
|
||||||
# Call our functions set above
|
# We accept the parameters: start, stop and apmode
|
||||||
load_easymesh_config
|
# start: Enables easymesh
|
||||||
set_easymesh
|
# stop: Disables easymesh
|
||||||
|
# apmode: Sets the device to AP mode
|
||||||
|
if [ "$1" = "start" ]; then
|
||||||
|
clear_old_networks
|
||||||
|
create_bat0
|
||||||
|
find_radios
|
||||||
|
process_radios
|
||||||
|
restart_and_reload
|
||||||
|
elif [ "$1" = "stop" ]; then
|
||||||
|
clear_old_networks
|
||||||
|
disable_easymesh
|
||||||
|
# elif [ "$1" = "apmode" ]; then
|
||||||
|
# set_apmode
|
||||||
|
else
|
||||||
|
echo "Invalid parameter passed."
|
||||||
|
fi
|
||||||
|
|||||||
Loading…
Reference in New Issue